Applications: In humid, wet and dusty indoor areas of industrial and agricultural premises, for workshops and car parks, cold stores, low temperature stores, cooling chambers and walkable low temperature cabins in hotels, climate chambers, roofed outdoor areas, hard to reach areas with high downtime and maintenance costs when replacing the lamps. etc. (In case of aggressive atmosphere please consult us) Design: Housing: Glass fibre reinforced polyester resin, foamed silicone gasket. Diffuser: Injection-molded acrylic glass, frosted for glare limitation. Closure: Three-part captive plastic clips (KK), incl. 2 safety clips (KKS) to ensure protection against contact. Reflector: Aluminium, painted, can be suspended or removed and carries the electrical components. Connection: 3-pole or 5-pole terminal (DIMD). Cable entries: 2 plugs M20. Mounting: Closed knock-outs for direct ceiling mounting (to be opened at site). Sealing and pressure disks inside each fitting. Technical data: LED: Linear modules 4,000K, CRI > 80, Lg0 > 50,000h at max. ambient temperature ECG: 220-240V, 50/60HZ, overload and short-circuit protection Ambient temperature: -20°C (-40°C for types ...T40) up to ..°C see product table Options: - 6 500K - high colour rendering index Ra>90 (light colour 940) - signalization with coloured LED - amber-colored LED e. g. for insect-friendly lighting, nature reserves, locks etc. - increased protection against corrosive atmospheres or harmful gases, version ER and HR - protection class II - for connection to group or central battery systems (ZB) or emergency mains respectively - PC-diffuser, frosted (PC) - stainless steel clips (KE) - with through wiring system Product highlights: • robust, extremely strong quality light fitting especially suited for rough industrial use • high impact strength housing, excellent chemical and UV-resistance • highest efficiency to use top-quality ECG and LED modules • diffuser with high mechanical stability, fourfold safety against outer impact • homogeneous illumination by using frosted diffusers, no particular light points visible, comfortable perception of light, brilliant glare limitation • high colour rendering CRI > 80, according to the workplace guide lines suitable for nearly all plant locations • with "D"-sign, suitable for rooms with increased fire risk due to deposits of combustible dust and fibrous materials • ECG and reflector with LED-modules can be replaced by qualified personnel on-site (no throw-away light fitting) • future proof by using standardized LED-modules (Zhaga) Cable entries for looping the mains cable on one side (loop in/loop out): Optionally the light fittings can be supplied with 2 cable entries on one small side. This feature allows an optimal adjustment to all local conditions and it will consequently save the typical quite expensive through wiring system (preparation at additional cost). Notes: Maximum energy saving by using types which are optimized for energy consumption. I Notes: Properties, limitations and details for controlling LED-light fittings: See "Technical Supplement” All technical data is relevant at the time of print. Actual technical data can be found in the internet under www.schuch.de. with high luminous flux * The given information is for rough orientation only. In each ** see notes individual case a lighting calculation is necessary. Subject to technical changes, misprints and errors.

* The given information is for rough orientation only In each individual case a lighting calculation is necessary ** see notes, power consumption in dimming mode depends on the dimming adjustment! Subject to technical changes, misprints and errors.

161... H50 for high ambient temperatures up to +50°C Applications: Generating plant, steel plant, machine-oriented areas, areas with high process waste heat, areas close to the ceiling with accumulating heat etc. * The given information is for rough orientation only. In each individual case a lighting calculation is necessary ** see notes, power consumption in dimming mode depends on the dimming adjustment! Subject to technical changes, misprints and errors.

for wide temperature ranges from -40° to see product table Applications: Design: Climatic chambers, material container, test benches in As standard version, but: the automotive industry, regions with extreme tempera- Diffuser: Injection-molded polycarbonate, frosted for ture fluctuations etc. glare limitation. Notes: The light fitting is not to be used in areas with high mechanical stress (wind) or seldom usage (i.e. mainte-nace and inspection only). We recommend our series 144... in AUS-version or a weather roof within very critical environmental conditions. When mounting the light fittings...

* The given information is for rough orientation only. In each individual case a lighting calculation is necessary ** see notes, power consumption in dimming mode depends on the dimming adjustment! Subject to technical changes, misprints and errors.

for high ambient temperatures up to +50°C 161... LM T40 for ambient temperatures down to -40°C Subject to technical changes, misprints and errors. * The given information is for rough orientation only In each individual case a lighting calculation is necessary ** see notes, power consumption in dimming mode depends on the dimming adjustment! 161... FastFix/FastConnect (FF/FC) with FastFix mounting system Design: Same as standard but, with pre-assembled quick mounting system (FastFix) and quick-connector (FastConnect), for 3-pole connecting cable up to 2.5mm2 (0 7.5 - 12.5mm) Advantages of the...

Accessories / Spare Parts Article no. Type Subject to technical changes, misprints and errors.