Energy Exploration Mine Rescue t130XD Water Well Range III Capability in a Compact Over the Road Drilling Rig The T130XD is the drilling contractor’s rig of choice for energy, mineral exploration, mine rescue and large diameter municipal water well drilling applications around the world. Thanks to its patented Telemast design, the T130XD offers Range III tubular capability in a fully portable over the road package that can be set up in a matter of hours upon arrival to the drilling site. In addition, its small footprint dramatically reduces environmental impact. ® When supplied with a tilting top head, this rig is fully compatible with LoadSafe®, Schramm’s trailer mounted, fully automated pipe handling system. LoadSafe® offers the highest degree of operator safety available in the industry today. Any climate, any terrain, Schramm rigs are built your way, delivering maximum performance and reliability in the most extreme environments on earth. 45° Sliding angle mast Equipped with Schramm patented Telemast® for easy portability and fast set up g Up to 130,000 lbf ( 578 kN) pullback and Range III tubular capability g Precise hydraulic weight on bit control g Drill compressor selectable air at 1,150 cfm @ 500 psi or 1,350 cfm @ 350 psi (32.6 m3/min @ 35.5 bar or 38 m3/min @ 24.1 bar) g Compact 43 ft (13.1 m) transport length with less than 6 - 8 ft (1.8 – 2.4 m) overhang g Optional trailer mounted configuration available g Additional options include variable angle mast, casing rotator and LoadSafe® automated pipe handling system g Schramm’s Telemast® equipped rigs feature fast set-up, long top head travel, short transport length, small foot print, and low site impact. Rigs can be supplied with hydraulic breakout, power slips and the Schramm LoadSafe® automated pipe handling system. Trailer mounted drill pipe, collar and casing handling system safely and precisly lifts tubulars from horizontal position into alignment with the tilting top head.

t130XD SPECIFICATIONS DECK ENGINE OUTRIGGERS ··Detroit Diesel DDC/MTU 12V-2000TA DDEC ··760 bhp (567 kw) @ 1800 rpm ··2 x 110 gallon (415 l) fuel tanks ··Air or electric start available ··Single Front - 5 inch (127 mm) bore x 41 inch (1.04 m) stroke ·· ual Rear - 5 inch (127 mm) bore x 41 inch (1.04 m) stroke D WINCH STANDARD COMPRESSOR ··Variable volume two-stage, oil flooded rotary screw compressor ·· electable air: 1,150 cfm @ 500 psi or 1,350 cfm @ 350 psi S (32.6 m3/min @ 35.5 bar, 38 m3/min @ 24.1 bar) ··Schramm patented air-Control COOLING ·· hree core, side by side heat exchanger with...