ELECTRIC PRE-HEATER AS A FLOW HEATER FOR FLUID APPLICATION TYP 97 AS

Product catalog summary

Overview: The document describes the Electric Pre-Heater Type 97 AS, designed for fluid applications with temperatures up to 160°C. It features an aluminum AlMg3 pipe body with a diameter of LW 63, a screw-plug immersion heater with a temperature limiter, a G2” threaded brass pipe plug, and stainless steel tubular elements.

Specifications:

Maximum Operating Pressure: 15 bar
Minimum Flow Rate: Approximately 2 m²/h

Contact Information:

Bernd Tigges: Phone: +49 2392 - 692 - 42, Fax: +49 2392 - 692 - 8942, Email: [email protected]
Stephan Drüeke: Phone: +49 2392 - 692 - 43, Fax: +49 2392 - 692 - 8943, Email: [email protected]

Catalog excerpts

ELECTRIC PRE-HEATER AS A FLOW HEATER FOR FLUID APPLICATION TYP 97 AS-1

ELECTRIC PRE-HEATER AS A FLOW HEATER FOR FLUID APPLICATION TYP 97 AS For temperatures up to 160°C we produce the type AS series with an aluminum AlMg3 pipe body in diameter LW 63 with a screw-plug immersion heater equipped with a temperature limiter, a G2” threaded brass pipe plug and stainless steel tubular elements. • Maximum operating pressure: 15 bar • Minimum flow rate: approx. 2 m²/h

Open the catalog to page 1