CSN® FLANGE HEATERS TYPE SERIES 96 FF/… CSN® Flanged immersion heaters are used in process engineering, cleaning technology, chemical industry, plastics industry, as well as in mechanical engineering and shipbuilding. Application: CSN® flange heaters are particularly suitable for heating water, caustic solutions, heat transfer liquids, heavy oil, asphalt, turbine oil and hydraulics oil. Technical data: Nominal output: up to 1000 kW Number of circuits: to be agreed upon Operating temperature: Liquids: up to 520°C Nominal width: DN 50 to DN 1000 Nominal pressure: PN 6 to PN 100 Installation length: up to max. 3500 mm Rated voltage: up to 1100 Volt 3~ Construction CSN® flanged immersion heaters basically consist of: Highly compacted CSN® tubular heating elements in diameters 8,5; 11,5 and 16 mm, blind flange, spacer plates or baffles, terminal enclosure, thermostats, temperature probes, terminal clamps and cable glands. CSN® tubular heating elements: The highly compacted CSN® tubular heating elements are produced according to DIN 44874, 44875 or in conformity to it. The CSN® Giso sealing ensures a permanent high insulation resistance of the tubular elements. material tubular Heating element Equipment for installation in hazardous areas we produce in protection class „Ex d“, „Ex de“, „Ex e“. Specialist contact person: Peter Deja Julian Müller Phone: +49 2392 - 692 - 32 Phone: +49 2392 - 692 - 747 Fax: +49 2392 - 692 - 8932 Fax: +49 2392 - 692 - 89747 eMail: [email protected] eMail: julia