CSN® AIR HEATER TYPE 830

Product catalog summary

Overview: The CSN® Air Heater Type 830 is a transportable heating device designed for applications such as spot heating in production processes and drying of pipes. It features a protection mode of IP 54, indicating its resistance to dust and water ingress.

Components: The air heater consists of a steel sheet duct with tubular heating elements, a terminal box, thermostats, a switch, a blower, a 5-meter connection cable, a time-delay relay, and a CEE plug. It is suitable for connection to a pipe system.

Control Steps:

Step 1: Cold mode, only the fan is activated.
Step 2: Half capacity operation.
Step 3: Full capacity operation.

Specifications: The air heater is suitable for voltages up to 690 V 3-phase. It can be equipped with different blowers, such as high-pressure blowers, if necessary.

Technical Data:

Type 830/9: 9.0 kW, Dimensions (A: 700 mm, B: 1070 mm, C: 560 mm), Fan flow rate: 1500 m³/h, Static pressure: 600 Pa.
Type 830/12: 12.0 kW, Dimensions (A: 850 mm, B: 1220 mm, C: 560 mm), Fan flow rate: 1500 m³/h, Static pressure: 600 Pa.
Type 830/15: 15.0 kW, Dimensions (A: 1005 mm, B: 1375 mm, C: 560 mm), Fan flow rate: 1500 m³/h, Static pressure: 600 Pa.
Type 830/18: 18.0 kW, Dimensions (A: 1315 mm, B: 1690 mm, C: 600 mm), Fan flow rate: 1800 m³/h, Static pressure: 840 Pa.

Contact Information: For specialist inquiries, contact Peter Deja at +49 (2392) - 692 - 32 or via email at [email protected], and Julian Müller at +49 (2392) - 692 - 747 or via email at [email protected].

Catalog excerpts

m| SCIHNI INIDY ^yJJU THE POWER OF ELECTRIFYING IDEAS CSN® air heater type 830 Protection mode IP 54 transportable Application: E.g. spot heating of production processes,drying of pipes Consisting of: • a steel sheet duct with incorporated tubular heating elements, • terminal box, • thermostates, • switch and a blower, • suitable for connection to a pipe system • with 5 m connection cable, • time-delay relay • CEE plug Control: 1. step = cold, only the fan is switched-on 2. step = half capacity 3. step = full capacity Air heater, type 830/.. are suitable for voltages up to 690 V 3 ph. If necessary, heater could be equipped with other blowers, e.g. high pressure blowers. Specialist contact person: Peter Deja Phone: +49 (2392) - 692 - 32 eMail: [email protected] eMail: [email protected]

Open the catalog to page 1

CSN® AIR HEATER TYPE 830

CSN® AIR HEATER TYPE 830

Catalog excerpts

All Schniewindt GmbH & Co. KG catalogs and technical brochures