*mydirectindustry

linearweld VTCL

Product catalog summary

Overview: The LINEARWELD VTCL is a longitudinal seam welding machine designed for vertical tank production. It is optimized for seam welding on standing tank sections, enhancing handling efficiency. The machine's capacity is primarily limited by the available production space.

Welding Methods: Preferred methods include TIG and Plasma-Keyhole, chosen based on material type, thickness, and required weld properties.

Technical Specifications:

Models: LINEARWELD VTCL 1600 and 2100
Tube Length: Max 1600 mm and 2100 mm respectively
Tube Diameter: Min 450 mm and 500 mm respectively
Material Thickness: 1.0 mm to 10.0 mm
Material Type: Stainless Steel (CrNi) preferred
Welding Process: Plasma, TIG
Gas Types: Torch Gas, Backing Gas, Trailing Gas
Torch Travel Speed: 10 cm/min to 770 cm/min
Clamping System: Pneumatic with pre-clamp feature
Control System: Siemens S7-ET 200S with a 7.0ʺ Touch Display
Welding Interface: Roboterinterface, Profibus
Standard: CE-Mark
Electric Supply: 400/230 Volt / 3 / N / PE; 50/60 Hz; TN-Netz
Air Supply: 6 bar, dry, filtered
Ambient Temperature: +10°C to +35°C

Welding Conditions: Vertical welding conditions differ from horizontal. For vertical down welding (PG) with plasma-keyhole and wire, the maximum material thickness for a single pass is approximately 6 mm. Thicker materials may require seam preparation and multi-pass welding to avoid elongated pores.

Options and Accessories:

Centre Stops and Centre Mark with laser pointer for part alignment
Machine body movable with electric drive, rail guided
Welding program memory and router for remote diagnosis
Air conditioning unit for electric control cabinet
Various welding and cooling equipment options including FRONIUS and MIG-O-MAT units

Catalog excerpts

LINEARWELD VTCL | Longitudinal Seam Welding Machines Longitudinal Seam Welding Machine LINEARWELD VTCL Figure 1: LINEARWELD VTCL 1600 longitudinal seam welder for vertical tank production The vertical seam welding machine LINEARWELD VTCL is designed for seam welding on standing tank sections. If the surrounding production processes fit, the standing welding position improves tank section handling significant. The maximum diameter that can be welded on this machine is only limited by the available local production space. Preferred welding methods are TIG or Plasma-Keyhole. The welding process and equipment to be used depends on the material type and thickness as well as the required weld properties. Schnelldorfer Maschinenbau GmbH Phone +49 (0) 7950 9889-0 | Fax -29 www.schnelldorfer-maschinenbau.de

Open the catalog to page 1

LONGITUDINAL, CORNER, CIRCULAR SEAM WELDING MACHINES SPECIAL WELDING MACHINES LINEARWELD VTCL | Longitudinal Seam Welding Machines Schnelldorfer Maschinenbau GmbH LINEARWELD VTCL_20170629_Engl Page 2 of 4 Phone +49 (0) 7950 9889-0 | Fax -29 www.schnelldorfer-maschinenbau.de PERFECTION WELDS TOGETHER.

Open the catalog to page 2

LONGITUDINAL, CORNER, CIRCULAR SEAM WELDING MACHINES SPECIAL WELDING MACHINES LONGITUDINAL, CORNER, CIRCULAR SEAM WELDING MACHINES SPECIAL WELDING MACHINES LINEARWELD VTCL | Longitudinal Seam Welding Machines LINEARWELD VTCL Note: Welding condition and parameter when welding vertical up (PG) or down (PF) are not comparable to horizontal welding position (PA). For vertical down welding (PG) with plasma-keyhole and wire, the maximum material thickness to be welded in butt joint geometry with on pass only is app. 6 mm. If material thicker than 6 mm is welded elongated pores may form. Therefore seam...

Open the catalog to page 3

LONGITUDINAL, CORNER, CIRCULAR SEAM WELDING MACHINES SPECIAL WELDING MACHINES LONGITUDINAL, CORNER, CIRCULAR SEAM WELDING MACHINES SPECIAL WELDING MACHINES LINEARWELD VTCL | Longitudinal Seam Welding Machines 1044348 LINEARWELD VTCL 1600, mandrel lift vertical Longitudinal seam welder 1044462 LINEARWELD VTCL 2100, mandrel lift vertical Longitudinal seam welder Options Machine Design Centre Stops (2 piece), automatic Centre Mark with laser pointer, for part alignment (manual) 1044424 Machine body movable with electric drive, rail guided for LINEARWELD VTCL Options Machine Control...

Open the catalog to page 4

linearweld VTCL

linearweld VTCL

Catalog excerpts

All Schnelldorfer Maschinenbau catalogs and technical brochures