Tender specification text Product: Steel sliding door Type: ST602S hand operated/power operated Manufacturer: SCHNEIDER Technical design in accordance with the applicable standards and regulations for the protection of employees. Area of application: Door for industry and workshops. An accurately designed door for every requirement. A solid sliding door contains virtually no wear parts so there are minimal maintenance and servicing costs. U value approx. 3 W/m²K (depending on the door infill) Operation: manually operated with hook lock or power operated with electric drive General design: Fully functional steel sliding door in self-supporting frame construction, door leaf consisting of hot-dip galvanised steel profiles (Strip galvanizing according to EN 10346) with powdercoated surface. Construction depth 60 mm, profile width 95 mm Infill with dual-wall construction elements (panels or glass) Running rail produced from hot-dip galvanised steel profile (Strip galvanizing according to EN 10346) with powder-coated surface and downward opening, 3.5 mm wall thickness, dimensions 68 x 67 mm; 6.3 kg/running metre with bolted seal carrier to partially cover the steel running rail (aluminium cover profile) with continuous sealing lip. Suspension of the door leaves by horizontal and vertical guided roller units. Roller diameter 80 mm, plastic-coated for vertical guidance and 2 roller diameter of 65 mm for horizontal guidance. Dust-proof, maintenance-free ball bearings. Floor stop by means of floor bracket 50/50/5 mm hot-dip galvanised incl. claws. Panels inserted into frame profile. Locking via hook lock or electric drive. Frame: Wall thickness of profiles min. 2 mm hot-dip galvanised steel (Strip galvanizing according to EN 10346) with powder-coated surface. Profiles mitred and joined by brazing. Profiles must not be welded in the visible area, as there is an increased risk of corrosion due to the burning of the zinc. Infill: Double-walled, insulated sandwich panel. Consisting of 1 mm hot-dip galvanised sheet steel (Strip galvanizing according to EN 10346) with powder-coated surface on the outside and inside, fully bonded with 40 mm Status as of 2021/02

hard foamed polystyrene (total thickness 42 mm) or with perforated aluminium sheet, perforated cross-section 7x7 mm, ventilation cross-section 50 % of the surface. Standard separation > 3200 mm height 1 horizontal transom. Glazing with insulating hard glass (safety glass) H4/20/4 with a U-value of 1.1 W/m²K. Dry glazing (without silicone) inside with aluminium retaining strips A6/C0 anodised with EPDM clamping rubber (different glass infills are possible on request). Maximum glass height 4 m. Full glazing up to a maximum door height of 5 m. Surface: Powder-coated in façade quality RAL standard...

Outer frame width 1-part (max. 4.8 m): Outer frame height (max. 5 m): Passage width: Passage height: Fields per leaf: Number of fields with panel infill: Outer panels: Inner panels: Number of fields with glazing: Frame transom profiles: Running rail: Special version: Ground detail:

POWER-S sliding door drive: Electromechanical sliding gate drive Worm gear motor with integrated frequency converter stationary mounted on a local wall bracket at the side of the reveal. An HTD 8M toothed belt system 20 mm thick, is tensioned like a linear rack parallel to the running rail in an additional running rail and is steered by a toothed belt pulley mounted on the drive. The ball bearing mounted carrier connected to the toothed belt is fixed to the door leaf and is guided in the additional running rail. The open and closed door position can be optimally adjusted using the digital limit...

Labour Miscellaneous Handheld transmitter: Handheld transmitter 4 channel Labour Miscellaneous