Positioning systems / Slides
13Pages

LINEAR TECHNOLOGY Positioning Tables NFM / NH2 - AL Slides NE - AL

& FSC www.fsc.org MIX Paper from responsible sources FSC* C100493 Latest version of the catalogs You can always find the latest version of our catalogs in the Download area of our website. Disclaimer This publication has been compiled with great care and all information has been checked for accuracy. However, we can assume no liability for incorrect or incomplete information. We reserve the right to make changes to the information and technical data as a result of enhancements to our products. Reprinting or reproducing, even in part, is not permitted without our written consent.

SCHNEEBERGER UNEAR TECHNCXOGY Table of contents Page number Positioning Tables NH2_5 1.1 Positioning Tables NH25 Positioning Tables NFM 13 3.1 Positioning Tables NFM13

Single axis stages with SCHNEEBERGER linear bearings Type R2-RF. Manual positioning with micrometer, reading accuracy 0.01mm. Table parts are lightly loaded onto the micrometer screw by a tension spring. Design is available with or without micrometer, with or without spring. Micrometer fastening on the side or front of the stage. Tables of the same size can easily be assembled into 2 axis configuration. Standard strokes 13/13 and 25/(40)mm. Special hole patterns or strokes on request. All designs with a clamping system on the side of the stage. Table parts in aluminium anodised. Linear...

SCHNEEBERGER UNEAR TECHNOLOGY Technical data 1.0 Positioning Tables NH21.3 Drawings Type ... - MS 1.4 Dimension Tables Type

SCHNEEBERGER UNEAR TECHNCXOGY Technical data 1.0 Positioning Tables NH2 Type ... - ML ^ + H / H1

Type NE AL slides are designed as closed model, which means that they can be sealed on all sides with small spacing between upper and lower sections. Prevent the ingress of dirt. All sizes are equipped with linear bearing type R bearings. There are standardized attaching thread holes in the upper and lower section. Table parts in aluminium. Linear bearings in corrosion resistant steel (only NE 1 and NE 2). Tables can be integrated in any position.

SCHNEEBERGER UNEAR TECHNOLOGY Technical data

SCHNEEBERGER UNEAR TECHNCXOGY Technical data

Single axis manual driven stages with SCHNEEBERGER MINIRAIL – guideways. Manual positioning by a precision lead-screw, with anti- backlash nut and raduated drum, that can be set to zero position. Reading accuracy 0.01mm, strokes from 25mm to 150mm. NFM is a modular system with options for table base and top plate lengths, to give strokes between 25 and 150mm. Table parts made in aluminium anodised, MINIRAIL linear guideways and lead screw in corrosion resistant steel. Stage can be integrated in any plane. Special sizes and/or special attaching holes available on request. Optional clamping...

SCHNEEBERGER UNEAR TECHNOLOGY Technical data

SCHNEEBERGER UNEAR TECHNCXOGY 3.0 Positioning Tables NFM Technical data

www.schneeberger.com www.schneeberger.com/contact PROSPECTUSES • COMPANY BROCHURE • MINI-X MINIRAIL / MINISCALE PLUS / MINISLIDE • CUSTOMIZED BEARINGS • MONORAIL AND AMS PROFILED LINEAR GUIDEWAYS • GEAR RACKS WITH INTEGRATED MEASURING SYSTEM • LINEAR BEARINGS AND RECIRCULATING UNITS • MONORAIL AND AMS APPLICATION CATALOG • MINERAL CASTING SCHNEEBERGER • POSITIONING SYSTEMS • MINISLIDE MSQSCALE A.MANNESMANN MINERALGUSSTECHNIK