UP-DO series
9Pages

Product information UP-DO Pump Series Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.4581

Description UP-DO Pump Series Normal priming centrifugal pumps with a double Mechanical seal Application: The UP-Do Pump Series is designed for all sorts of applications and is perfectly suitable for the transmitting operation in stainless steel plants as well as for severe thermal stress environments. Circulation pump for heat exchanger, use for very hot alkaline liquids, laboratory applications, environment engineering, paper manufacturing, electroplating technology, airplane jet engine cleaning plants, filtration, food industr, varnish processing operations, for soiled and metallically...

chemical resistant pumps Materials details: » Main material: Parts solid made of stainless steel 1.4581 » Elastomere alternatively made of FKM, EPDM, FEP or Kalrez® » Shaft made of stainless steel » Mechanical seals made of PTFE, ceramic, carbon or SiC » The double mechanical seal is spring-loaded (spring made of Hastelloy C4) » High-quality electric motors made in Germany » Stainless steel: 1.4571 or stainless steel fine cast 1.4581 (A4), up to +150° C » FKM: Viton® quality, -20...+200° C » EPDM: Ethylene propylene diene M-class rubber, Food-safe (FDA, KTW, WRC), -40...+160° C » FEP:...

Motor details: Standard Motors (stock items): » Three-phase motors: 230/400 V 3ph, 50 Hz, IP 55, insulation-class F » or 277/480 V 60 Hz also with PTC thermistor » Alternating current motors: 230 V 1ph, 50/60 Hz, IP 55, Insulation class F » Three-phase motors: spark arrested for combustible environments, explosion proof: EEx e II T3 Special design models (available): » Three-phase motors, explosion proof, flameproof enclosure, EEx de II CT4 » Special voltages and frequencies » 2-, 4- and 8-pole » UL and CSA execution » Special protection types (e.g. IP 65) » High temperature designs »...

UP-DO 100 to UP-DO 210 Pump Series Motor power » UP-DO 210: 5,50 kW » UP-DO 190: 3,00 kW » UP-DO 170: 2,20 kW » UP-DO 150: 1,10 kW » UP-DO 130: 0,55 kW » UP-DO 115: 0,25 kW » UP-DO 100: 0,18 kW Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

chemical resistant pumps Parts DescriptionsUP-DO Pump Series Part-No.

Seal water wiring diagram UP-DO Pump Series For pumps with double mechanical seal Manometer Manometer Shutoff device Absperrorgan Schlauchtüllen shaft sleeves The necessary barrier pressure can be determined after following rules: P sperr (bar) = H/20 x p + 1 to 1,5 bar p (kg/dm³) = specific gravity of the medium to be pumped H = max. discharge hea

Specification chemical resistant pumps UP-DO Pump Series Type The dimensions of the motors refer to three-phase standard motors.

Types UP-DO Pump Series all driving motors are to IEC standard operating on 230/400 volts 50 cycles. single phase A.C. motors are also available up to 1,10 kW. explosionproof motors can be supplied to the whole range of pumps. special voltages, frequencies and types of protection can be delivered on request. » upon request all motors can be supplied for USA standard (UL proof). » for each pump also detail handouts are available. We reserve the right to alter the technical details. Dimensions and performance details without guarantee.