U series
8Pages

Product information U Pump Series Normal priming, centrifugal pumps with a single mechanical seal Material: PVDF chemical resistant pumps

chemical resistant pumps Application: Field of application: Material: Max. output rate: Max. discharge head: Motor power: Normal priming centrifugal pumps with a single mechanical seal The U Pump Series is universally applicable.The design and manufacturing materials allow for optimization for many operating conditions and media to be pumped. Wastewater treatment, filtration, exhaust air scrubbers, electro-plating technology, environment engineering, textile industry, laboratory applications, photographic chemicals, purifying plants, applications also for dirty and metallically contaminated...

TypesU Pump Series Materials and Components: Material details: » Main material: Parts solid made of PVDF (up to +95°C) » Elastomere alternatively made of FKM, EPDM, FEP or Kalrez® » Shafts are made of stainless steel or Hastelloy C4 » Mechanical seals made of PTFE, ceramic, carbon or SiC » Structure in the designs A, B and C: - Design A: No metal parts in the pump are in contact with the medium. The impeller is equipped with a shaft sleeve. The face pressure is achieved with a thrust-collar-loaded mechanical seal. - Design B: The mechanical seal is spring-loaded. The impeller is equipped...

TypesU Pump Series SCHMITT chemical resistant pumps Motor details: Standard Motors (stock items): » Three-phase motors: 230/400 V 3ph, 50 Hz, IP 55, insulation-class F or 277/480 V 60 Hz also with PTC thermistor » Alternating current motors: 230 V 1ph, 50/60 Hz, IP 55, Insulation class F » Three-phase motors: spark arrested for combustible environments, explosion proof: EEx e II T3 Special design models (available): » Three-phase motors, explosion proof, flameproof enclosure, EEx de II CT4 » Special voltages and frequencies » 2-, 4- and 8-pole » UL and CSA execution » Special protection...

Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

chemical resistant pumps Parts DescriptionsU Pump series Parts for design: A, B, C Design A with rubber spring Parts for axial face seal of design: B

Specification chemical resistant pumps U Pump Seriesgi Type The dimensions of the motors refer to three-phase standard motors.

Types U Pump Series all driving motors are to IEC standard operating on 230/400 volts 50 cycles. single phase A.C. motors are also available up to 1,10 kW explosionproof motors can be supplied to the whole range of pumps. special voltages, frequencies and types of protection can be delivered on request. » upon request all motors can be supplied for USA standard (UL proof). » for each pump also detail handouts are available. We reserve the right to alter the technical details. Dimensions and performance details without guarantee.