*mydirectindustry

TE series

Product catalog summary

Overview
The TE Pump Series consists of submersible pumps made from stainless steel 1.4571, designed for applications where containers cannot be flange connected or where dry run cannot be excluded. These pumps are suitable for high-temperature environments and various industrial applications, including electro-plating, jet engine cleaning, and food industry tasks.

Specifications
- Materials: Stainless steel 1.4571 and 1.4581, PTFE gaskets.
- Suction Head: 200 - 800 mm
- Max Output Rate: 280 l/min
- Max Discharge Head: 0.18 - 2.2 kW
- Temperature Resistance: Up to +150°C

Design and Advantages
The pumps feature a vertical motor power transmission to the impeller via an extended shaft, eliminating the need for bearing and shaft seals. This design ensures abrasion-free operation and high chemical resistance. The robust construction allows for handling solids up to 3 mm in size and ensures easy maintenance.

Motor Details
- Standard Motors: Three-phase motors (230/400 V, 50 Hz) and alternating current motors (230 V, 50/60 Hz).
- Special Designs: Explosion-proof, high-temperature, and special insulation class motors available.
- Additional Options: Special voltages, frequencies, and protection types upon request.

Performance Characteristics
The performance characteristics are measured with water at 20°C and 2900 RPM. The pumps are available in various models (T 115, T 130, T 150, T 170, T 190) with different motor powers and immersion depths.

Dimensions
The dimensions of the pumps vary by model, with specific measurements provided for each type.

Additional Information
All motors comply with IEC standards, and explosion-proof options are available. Customizations for US standards and detailed handouts are available upon request. Technical details are subject to change without notice.

Catalog excerpts

Product information TE Pump Series Submersible pumps Materials: stainless steel 1.4571

Open the catalog to page 1

DescriptionTE Pump Series SCHMITT chemical resistant pumps Submersible pumps Application: The TE Pump Series is particularly suitable if containers or dipping baths can not be flange connected to the side or if dry run in the plant cannot be excluded as well as for high temperatures. Field of application: Electro-plating technology, airplane jet engine cleaning plants, filtration, large- scale bakeries, raucheranlagen fur Wurstherstellung, for very hot alkaline liquids, laboratory applications, Environment engineering, food industry, circulating and mixing tasks, application for dirty and...

Open the catalog to page 2

TypesTE Pump Series SCHMITT Kneiselpumpen chemikalienfeste Pumpen Materials and Components: » Supporting pipe and shaft made of 1.4571 (A4) » Impeller and housing made of stainless steel fine cast 1.4581 (A4) » Housing gasket made of PTFE » High-quality electric motors made in Germany Material details: » Stainless steel: 1.4571 or stainless steel fine cast 1.4581 (A4) (up to +150° C) » PTFE: virginales Teflon® Motor details: Standard Motors (stock items): » Three-phase motors: 230/400 V 3ph, 50 Hz, IP 55, insulation-class F or 277/480 V 60 Hz also with PTC thermistor » Alternating current...

Open the catalog to page 3

TE Pump Series Motor power ET = depth of immersion Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

Open the catalog to page 4

SCHMITT Kneiselpumpen chemikalienfeste Pumpen Parts DescriptionsTE Pump series Part-no.

Open the catalog to page 5

SpecificationTE Pump Series SCHMITT Kneiselpumpen chemikalienfeste Pumpen The dimensions of the motors refer to three-phase standard motors.

Open the catalog to page 6

TypesTE Pump Series Motors: » all driving motors are to IEC standard operating on 230/400 volts 50 cycles. » single phase A.C. motors are also available up to 1,10 kW. » explosionproof motors can be supplied to the whole range of pumps. » special voltages, frequencies and types of protection can be delivered on request. Note: » upon request all motors can be supplied for USA standard (UL proof). » for each pump also detail handouts are available. We reserve the right to alter the technical details. Dimensions and performance details without guarantee.

Open the catalog to page 7

TE series

TE series

Catalog excerpts

All SCHMITT - Kreiselpumpen GmbH & Co. KG catalogs and technical brochures