SCHMITT Product Overview
16Pages

Product overview Chemical resistant pumps for corrosive and hazardous media SCHMITT chemical resistant pumps

Chemical resistant pumps for corrosive and hazardous media Non-metallic horizontal centrifugal pumps MPN Series 4 Stainless steel horizontal centrifugal pumps UP Series 10 Non-metallic vertical centrifugal pumps T Series 12 Stainless steel horizontal centrifugal pumps TE Series 13

non-metallic Pumps stainless steel pumps Series

MPN Series Hermetically sealed, magnetic drive, non-metallic centrifugal pumps Housing and impeller materials: PVDF, PP Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) Bushing materials: PTFE-GF, Al2O3-ceramics, SiC (silicon carbide), graphite carbon The MPN series is one of the most proven plastic magnetic drive pumps in the industry. Having been continuously improved over the decades, there are some ten thousand MPN pumps worldwide in use. The MPN series features a contact- and abrasion-free magnetic drive system, so that no mechanical seal is required to seal the...

MDN Series Hermetically sealed, magnetic drive, non-metallic centrifugal pumps, dry-run safe Housing and impeller material: PVDF Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) The MDN 130 is the dry-run safe version of the proven MPN series. The MDN series features our contact-free and abrasion-free magnetic drive system, so that no mechanical seal is required to seal the pump. The impeller rotates in chemical resistant, ceramic ball bearings. Advantages: » hermetically sealed, no mechanical seals » particularly suited for toxic, environmentally harmful and corrosive media »...

P SeriesHermetically sealed, magnetic drive, non-metallic regenerative turbine pumps Housing and impeller materials: PVDF Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) Bushing materials: PTFE-GF, Al2O3-ceramics, SiC (silicon carbide) The P Series is designed for applications in which a high delivery head is required, but a relative low flow is sufficient. The impeller is designed as a regenerative turbine wheel, which allows for higher pressure and almost linear head-flow-characteristics. The P series features our contact-free and abrasion-free magnetic drive system, so that...

U SeriesNon-metallic centrifugal pumps, single mechanically sealed Housing and impeller material: PVDF Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) Mechanical seal materials: SiC (silicon carbide), graphite carbon, PTFE-GF, Al2O3-ceramics Metal parts: Stainless steel ANSI 316Ti (1.4571), Hastelloy® C4 The U series is the SCHMITT entry model to cope with corrosive media. The impeller is directly mounted on the motor shaft extension. The pump is sealed with a single mechanical seal that is cooled and lubricated by the fluid. The mechanical seal is available in different...

U-DO Series Non-metallic centrifugal pumps, double mechanically sealed Housing and impeller material: PVDF Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) Mechanical seal materials: SiC (silicon carbide), graphite carbon, PTFE-GF, Al2O3-ceramics Metal parts: Stainless steel ANSI 316Ti (1.4571), Hastelloy® C4 For the U-DO series, the impeller is directly mounted on the motor shaft extension. A double mechanical seal in back-to-back configuration seals the pumps and prevents harmful media from entering the atmosphere. The double seal is cooled and lubricated by a barrier fluid,...

S Series Non-metallic centrifugal pumps, self-priming, single mechanically sealed Housing materials: PP or PVC Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) Mechanical seal materials: SiC (silicon carbide), graphite carbon, PTFE-GF, Al2O3-ceramics Metal parts: Stainless steel ANSI 316Ti (1.4571), Hastelloy® C4 The S series features a specially designed housing that allows the pump to self-prime the suction line and to lift the fluid from a level as deep as 5 m / 16.5 ft below the pump. The impeller is directly mounted on the motor shaft extension. The pump is sealed with a...

UP SeriesStainless steel centrifugal pumps, single mechanically sealed Housing and impeller materials: Stainless steel ANSI 316Ti (1.4581) Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) Mechanical seal materials: SiC (silicon carbide), graphite carbon, PTFE-GF, Al2O3-ceramics Metal parts: Stainless steel ANSI 316Ti (1.4571) The UP series is for those applications, in which a non-metallic pump cannot be used or is not desired, e.g. for temperatures up to 150°C / 300°F. The impeller is directly mounted on the motor shaft extension. The pump is sealed with a single mechanical...

UP-DO SeriesStainless steel centrifugal pumps, double mechanically sealed Housing and impeller materials: Stainless steel ANSI 316T1 (1.4581) Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) Mechanical seal materials: SiC (silicon carbide), graphite carbon, PTFE-GF, Al2O3-ceramics Metal parts: Stainless steel ANSI 316Ti (1.4571) The UP series is for those applications, in which a non-metallic pump cannot be used or is not desired, e.g. for temperatures up to 150°C / 300°F. A double mechanical seal in back-to-back configuration seals the pumps and prevents harmful media from...

T Series Vertical sealless non-metallic centrifugal pumps, dry-run safe Housing and impeller materials: PVDF, PP Elastomers: EPDM, FKM (e.g. Viton®), FEP, FFKM (e.g. Kalrez®) The T series features a massive vertical shaft extension that directly drives the impeller. The rotating shaft is solely supported by the motor bearings and therefor runs completely contact- and abrasion-free inside the housing. This design concept eliminates the need for shaft seals and additional bearings. Optionally, the T series can be ordered with a shaft seal as a vapor barrier. Advantages: » dry-run safe » no...

TE Series Vertical sealless stainless steel centrifugal pumps, dry-run safe Housing and impeller: Stainless steel ANSI 316Ti (1.4571) Elastomers: PTFE The TE series is for those applications, in which a non-metallic pump cannot be used or is not desired, e.g. for temperatures up to 150°C / 300°F. It features a massive vertical shaft extension that directly drives the impeller. The rotating shaft is solely supported by the motor bearings and therefore runs completely contact- and abrasion-free inside the housing. This design concept eliminates the need for shaft seals and additional...