Product information S Pump Series Self-priming centrifugal pumps with a single mechanical seal Materials: housing: PP or PVC other parts made of PVDF chemical resistant pumps

S Pump Series Application: Field of application: Materials: Suction head: Max. output rate: Max. discharge head: Motor power: Self-priming centrifugal pumps with a single mechanical seal The S Pump Series is especially conceived for the self-priming operation. Therefore, it is particularly suitable if frequent starts with an empty suction line are necessary or the penetration of gasses cannot be prevented. The design and manufacturing materials allow for optimized adaptability for the many different operating conditions as well as for the various media to be pumped. Sampling or the transmission...

S Pump Series Materials and Components: Material details: » Main material: Parts made solid of PVDF, PP or PVC » Medium temperature up to 50° C possible » Elastomere alternatively made of FKM, EPDM, FEP or Kalrez® » Shafts are made of stainless steel or Hastelloy C4 » Mechanical seals made of PTFE, ceramic, carbon or SiC » Structure in the designs A, B and C: - Design A: No metal parts in the pump are in contact with the medium. The impeller is equipped with a shaft sleeve. The face pressure is achieved with a thrust-collar-loaded mechanical seal. - Design B: The mechanical seal is spring-loaded....

chemical resistant pumps Motor details: Standard Motors (stock items): » Three-phase motors: 230/400 V 3ph, 50 Hz, IP 55, insulation-class F or 277/480 V 60 Hz also with PTC thermistor » Alternating current motors: 230 V 1ph, 50/60 Hz, IP 55, Insulation class F Special design models (available): » Three-phase motors, explosion proof, flameproof enclosure, EEx de II CT4 » Special voltages and frequencies » 2-, 4- and 8-pole » UL and CSA execution » Special protection types (e.g. IP 65) » High temperature designs » Special insulation classes (e.g. tropical insulations) » Multi area voltage...

SCHMITT chemical resistant pumps H (ft.) - 100 -S 115 - S170 Pump Series - 80 -Motor power » S 170: 2,20 kW » S 150: 1,10 kW » S 130: 0,55 kW 60 » S 115: 0,25 kW Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

chemical resistant pumps Parts DescriptionsS Pump series Part-no.

Specification chemical resistant pumps S Pump Series type The dimensions of the motors refer to three-phase standard motors.

TypesS Pump Series SCHMITT chemical resistant pumps Motors: » all driving motors are to IEC standard operating on 230/400 volts 50 cycles. » single phase A.C. motors are also available up to 1,10 kW » explosionproof motors can be supplied to the whole range of pumps. » special voltages, frequencies and types of protection can be delivered on request. » upon request all motors can be supplied for USA standard (UL proof). » for each pump also detail handouts are available. We reserve the right to alter the technical details. Dimensions and performance details without guarantee.