Product information UP
7Pages

Product information chemical resistant pumps Normal priming, centrifugal pumps with a single mechanical seal Material: stainless steel 1.4581

Description UP Pump Series Normal priming, centrifugal pumps with a single mechanical seal Application: Max. output rate: Max. discharge head: Motor power: The UP Pump Series is designed for all sorts of applications and is perfectly suitable for the transmitting operation in stainless steel plants as well as for severe temperature stress. Circulation pump for heat exchanger, for very hot alkaline liquids, oils and degreasing baths, airplane jet engine cleaning plants, petrochemical industry, Filtration, large-scale bakeries, electro-plating technology, laboratory applications, brewery...

Types UP Pump Series Material details: »» Main material: Parts solid made of stainless steel 1.4581 »» Elastomere alternatively made of FKM, EPDM, FEP or Kalrez® »» Shaft made of stainless steel »» Mechanical seals made of PTFE, ceramic, carbon or SiC »» The mechanical seal is spring-loaded (spring made of Hastelloy C4) »» High-quality electric motors made in Germany »» Stainless steel: 1.4571 or stainless steel fine cast 1.4581 (A4) (up to +150° C) »» FKM: Viton® quality, -20...+200° C »» EPDM: Ethylene propylene diene M-class rubber, Food-safe (FDA, KTW, WRC), -40...+160° C »» FEP:...

Characteristics UP Pump Series H (ft.) 36 30 H (ft.) 24 18 36 12 30 6 Motor power Motor power Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

Parts Descriptions UP Pump Series Materials standard mounting flange shaft extension C impeller locking nut backplate pump housing flinging disc thermal conduction plate hexagon bolt bolt + washer cotter pin rotating seal o-ring seal coil spring righthand side stationary seal o-ring seal thrust washer pump housing seal washer locking washer hexagon nut aluminium stainless steel stainless steel stainless steel stainless steel stainless steel rubber A4 A4 1.4571 carbon FKM* Hastelloy C ceramic FKM* stainless steel PTFE A4 stainless steel A4 on request stainless steel

Specification UP Pump Series g1 g1 suction conn. pressure conn. The dimensions of the motors refer to three-phase standard motors. l l2 l2

chemical resistant pumps Motors: » all driving motors are to IEC standard operating on 230/400 volts 50 cycles. » single phase A.C. motors are also available up to 1.10 kW. » explosionproof motors can be supplied to the whole range of pumps. » special voltages, frequencies and types of protection can be delivered on » upon request all motors can be supplied for USA standard (UL proof). Note: » you will find further information about our products and connecting parts as well as manuals and technical recommendations in several languages at our website www.schmitt-pumpen.de Kreiselpumpen GmbH...