Product information UP-DO
9Pages

Product information UP-DO Pump Series Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.4581 chemical resistant pumps

Description UP-DO Pump Series Normal priming centrifugal pumps with a double Mechanical seal Application: The UP-Do Pump Series is designed for all sorts of applications and is perfectly suitable for the transmitting operation in stainless steel plants as well as for severe thermal stress environments. Circulation pump for heat exchanger, use for very hot alkaline liquids, l ­aboratory applications, environment engineering, paper manufacturing, electro-­ lating technology, airplane jet engine cleaning plants, filtration, food p i ­ndustry, varnish processing operations, for soiled and...

Types UP-DO Pump Series Materials details: »» Main material: Parts solid made of stainless steel 1.4581 »» Elastomere alternatively made of FKM, EPDM, FEP or Kalrez® »» Shaft made of stainless steel »» Mechanical seals made of PTFE, ceramic, carbon or SiC »» The double mechanical seal is spring-loaded (spring made of Hastelloy C4) »» High-quality electric motors made in Germany »» Stainless steel: 1.4571 or stainless steel fine cast 1.4581 (A4), up to +150° C »» FKM: Viton® quality, -20...+200° C »» EPDM: Ethylene propylene diene M-class rubber, Food-safe (FDA, KTW, WRC), -40...+160° C »»...

Types UP-DO Pump Series Motor details: Standard Motors (stock items): Special design models (available): »» Three-phase motors: 230/400 V 3ph, 50 Hz, IP 55. insulation-class F »» or 277/480 V 60 Hz also with PTC thermistor »» Alternating current motors: 230 V 1ph, 50/60 Hz, IP 55. Insulation class F »» Three-phase motors: spark arrested for combustible environments, explosion proof: EEx e II T3 »» Three-phase motors, explosion proof, flameproof enclosure, EEx de II CT4 »» Special voltages and frequencies »» 2-, 4- and 8-pole »» UL and CSA execution »» Special protection types (e.g. IP 65)...

Characteristics UP-DO Pump Series UP-DO 100 to UP-DO 210 Pump Series Motor power UP-DO 210: UP-DO 190: UP-DO 170: UP-DO 150: UP-DO 130: UP-DO 115: UP-DO 100: Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

Parts Descriptions UP-DO Pump Series Materials standard mounting flange shaft extension impeller locking nut backplate inset O-Ring pump housing flinging disc hexagon bolt bolt + washer cotter pin rotating seal o-ring seal coil spring stationary seal o-ring seal thrust washer pump housing seal lockwasher spacer ring hose nozzle O -Ring washer locking washer hexagon nut SiC FEP or EPDM SiC FEP or EPDM FEP or EPDM

Seal water wiring diagram UP-DO Pump Series For pumps with double mechanical seal Manometer Manometer Shutoff device Absperrorgan Schlauchtüllen shaft sleeves The necessary barrier pressure can be determined after following rules: P sperr (bar) = H/20 x p + 1 to 1.5 bar p (kg/dm³) = specific gravity of the medium to be pumped H = max. discharge head

Specification UP-DO Pump Series g1 m UP-DO 100 UP-DO 115 UP-DO 130 UP-DO 150 UP-DO 170 UP-DO 190 UP-DO 210 The dimensions of the motors refer to three-phase standard motors. l l

chemical resistant pumps Motors: » all driving motors are to IEC standard operating on 230/400 volts 50 cycles. » single phase A.C. motors are also available up to 1.10 kW. » explosionproof motors can be supplied to the whole range of pumps. » special voltages, frequencies and types of protection can be delivered on » upon request all motors can be supplied for USA standard (UL proof). Note: » you will find further information about our products and connecting parts as well as manuals and technical recommendations in several languages at our website www.schmitt-pumpen.de Kreiselpumpen GmbH...