Product information series T
7Pages

{{requestButtons}}

Catalog excerpts

Product information series T - 1

Product information Submersible pumps without seals chemical resistant pumps

Open the catalog to page 1
Product information series T - 2

Description T Pump Series Submersible pumps without seals The T Pump Series is particularly suitable if containers or dipping baths cannot be flange connected to the side or if dry run in the plant cannot be excluded. Wafer production, gas u, exhaust air scrubber, environment engineering, PCB manufacturing, laboratory and medical and pharmaceutical technology, electro-plating technology, semiconductor technology, wastewater treatment, solar cell production, circulation and mixing application PVDF (polyvinylidene fluoride) or PP (polypropylene) Immersion depth: Max. discharge head: Motor...

Open the catalog to page 2
Product information series T - 3

Types T Pump Series Material details: » Parts in contact with the medium are made solid of PVDF (up to +95° C), or , PP (up to +80° C) » Housing seal alternatively made of FKM, EPDM, FEP or Kalrez® » Also with extension pipe and/or with filter basket » High-quality electric motors made in Germany » » » » PVDF: Polyvinylidene Fluoride, Pure, milky white, not colored (up to +95° C) PP: Polypropylene, Fiber glass-reinforced, gray (up to +80° C) FKM: Viton® quality, -20...+200° C EPDM: Ethylene propylene diene M-class rubber, Food-safe (FDA, KTW, WRC), -40...+160° C » FEP: Fluorinated ethylene...

Open the catalog to page 3
Product information series T - 4

Characteristics T Pump Series Motor power Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

Open the catalog to page 4
Product information series T - 5

Parts Descriptions T Pump series Material standard shaft cap impeller with shaft coating support tube pump housing hexagon bolt bolt cotter pin pump housing seal washer hexagon bolt hexagon bolt feather key Steel PVDF PP PP PP PP* A4 1.4305 FKM** A4 A4 PP* 1.4305 *for T 100 -130: PVDF **FKM = e.g. Viton® PVDF PVDF PVDF PVDF FEP / EPDM PVDF

Open the catalog to page 5
Product information series T - 6

Specification T Pump Series

Open the catalog to page 6
Product information series T - 7

chemical resistant pumps Motors: » all driving motors are to IEC standard operating on 230/400 volts 50 cycles. » single phase A.C. motors are also available up to 1.10 kW. » explosionproof motors can be supplied to the whole range of pumps. » special voltages, frequencies and types of protection can be delivered on » upon request all motors can be supplied for USA standard (UL proof). Note: » you will find further information about our products and connecting parts as well as manuals and technical recommendations in several languages at our website www.schmitt-pumpen.de Kreiselpumpen GmbH...

Open the catalog to page 7

All SCHMITT - Kreiselpumpen GmbH & Co. KG catalogs and technical brochures

  1. UP-DO series

    9 Pages

  2. UP series

    7 Pages

  3. U-DO series

    9 Pages

  4. U series

    8 Pages

  5. TE series

    7 Pages

  6. T series

    7 Pages

  7. S series

    8 Pages

  8. P series

    8 Pages

  9. MDN

    7 Pages