Product Information MPN
7Pages

Product information MPN Pump Series Normal priming, magnetically coupled centrifugal pumps Materials: PVDF or PP

Description MPN Pump Series Normal priming, magnetically coupled centrifugal pumps Application: The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without disrupting the liquid flow. Electro-plating technology, wastewater treatment, laboratory and medical e ­ ngineering, wafer production, printed circuit board (PCB) manufacturing, s ­ olar cell production, analytical instruments, semiconductor technology, z ­ oological seawater aquaria,...

Types MPN Pump Series Material details: »» Parts in contact with the medium are made solid of PVDF (up to +95° C), or , PP (up to +80° C) »» Housing seal alternatively made of FKM, EPDM, FEP or Kalrez® »» Slide bearings made of the materials PTFE/ceramic or SiC / SiC »» High-quality electric motors made in Germany »» PVDF: Polyvinylidene Fluoride, Pure, milky white, not colored (up to +95° C) »» PP: Polypropylene, Fiber glass-reinforced, gray (up to +80° C) »» FKM: Viton® quality, -20...+200° C »» EPDM: Ethylene propylene diene M-class rubber, Food-safe (FDA, KTW, WRC), -40...+160° C »»...

Characteristics MPN Pump Series Motor power MPN 150 - MPN 190 Pump Series Motor power Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

Parts Descriptions MPN Pump Series 04 mounting flange impeller with magnet + cover mouthring (left-hand thread) mouthring (right-hand thread) backplate + stationary ring pump housing + stationary ring pump housing seal support with magnet + cylinder bolt hexagon bolt cylinder bolt washer hexagon bolt PP*/AL PVDF PVDF PTFE PTFE PVDF ceramic PVDF ceramic FKM** mounting flange partTei l 01 C Fl a ns c h 01 A Auß enm a gnet a Support part 07 uf na hm e Tei l 07 W inkelr ing Tei l 12v mouthring part 12v right-hand thread W i nkel r i ng Tei l 11h left-hand thread mouthring part 11h Recht sgew i...

Parts Descriptions MPN Pump Series g1 pressure conn. The dimensions of the motors refer to three-phase standard motors.

chemical resistant pumps Motors: » all driving motors are to IEC standard operating on 230/400 volts 50 cycles. » single phase A.C. motors are also available up to 1.10 kW. » explosionproof motors can be supplied to the whole range of pumps. » special voltages, frequencies and types of protection can be delivered on » upon request all motors can be supplied for USA standard (UL proof). Note: » you will find further information about our products and connecting parts as well as manuals and technical recommendations in several languages at our website www.schmitt-pumpen.de Kreiselpumpen GmbH...