Product information P Pump Series Normal priming, magnetically coupled impeller-type peripheral pumps Material: PVDF

DescriptionP Pump Series SCHMITT chemical resistant pumps Normal-priming, magnetically coupled impeller-type peripheral pumps Application: The P Pump Series is particularly suitable for the frequency converter operati on and for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without disrupting the liquid flow. Field of application: Spraying of chemicals through narrow nozzles, Very narrow installation space in plants, electro-plating technology, waste water treatment, laboratory technology,...

TypesP Pump Series SCHMITT chemical resistant pumps Advantages: » due to the linear characteristic, this pump can be very precisely controlled and metered » approximately double the pressure at the same size, compared to conventional centrifugal pumps » transfer also possible at rising back pressure e.g. when filters are clogging » building block system with a centric suction port » fully compatible with the MPN Pump Series (with few steps, at location, an MPN Pump Series can be converted to a P Pump Series) » hermetically sealed, absolutely leak-proof the highest chemical resistance » low-maintenance...

P Pump Series Materials and Components: Material details: Motor details: Standard Motors (stock items): Special design models (available): » Medium contacting parts are made solid of PVDF » Housing seal alternatively made of FKM, EPDM, FEP or Kalrez® » Slide bearings made of the materials PTFE/ceramic » High-quality electric motors made in Germany » PVDF: Polyvinylidene Fluoride, Pure, milky white, not colored (up to +95° C) » FKM: Viton® quality, -20...+200° C » EPDM: Ethylene propylene diene M-class rubber, Food-safe (FDA, KTW, WRC), -40...+160° C » FEP: Fluorinated ethylene propylene with...

Characteristics P Pump Series P 130 Pump Series Motor power » P 130: 1,10 kW Characteristic lines measured with water, 20° C and 2900 Rpm (50 Hz.)

chemical resistant pumps Parts DescriptionsP Pump series Part-no.

SCHMITT chemical resistant pumps Type The dimensions of the motors refer to three-phase standard motors.

all driving motors are to IEC standard operating on 230/400 volts 50 cycles. single phase A.C. motors are also available up to 1,10 kW explosionproof motors can be supplied to the whole range of pumps. special voltages, frequencies and types of protection can be delivered on request. » upon request all motors can be supplied for USA standard (UL proof). » for each pump also detail handouts are available. We reserve the right to alter the technical details. Dimensions and performance details without guarantee.