Safety in system Protection for man and machine AZM150 · AZM155 THE SLIM SOLENOID INTERLOCK NEW

Approach levels via a rotatable actuating head Original size SLIM. STRONG. SAFE.

SOLENOID INTERLOCK AZM150 · AZM155 OVERVIEW OF THE INTERLOCKS NEW Solenoid interlock AZM150 with plastic actuating head Solenoid interlock AZM155 with metal actuating head Tried-and-tested base Holding force 1,500 N, 40 mm overall width, degree of protection IP65/IP67, power to unlock / power to lock principle Rotatable actuating head The actuator can be retracted from the front, rear, left, right or top. Tamper proof Individually coded actuators according to ISO 14119 (coding level "high") Flexible release mechanism Manual release, emergency exit or emergency release – complemented by accessories...

SOLENOID INTERLOCK AZM155 VARIANTS WITH A ROBUST METAL ACTUATING HEAD AZM155 TRIED-AND-TESTED BASE. ROBUST HEAD. All the benefits of the AZM150, plus a metal actuating head for demanding applications. Metal actuating head Robust for demanding applications, rotatable through 4 × 90°. Optimised magnet control PWM control reduces the magnet’s power consumption and heat generation. M12, 8-pole – SFB-compatible Quick, error-free installation and easy integration with the Schmersal Safety Fieldbox SFB, available in guard locking monitoring and actuator monitoring versions. M12, 12-pole Additional connector...

SOLENOID INTERLOCK AZM150 · AZM155 SAFE. FLEXIBLE. COMPACT. Variants of the actuating head Variable actuating directions The approach direction of the actuator can be adjusted by turning the approach head. Tamper proof Individually coded version with high coding level High holding force FZh = 1,500 N – for safe mechanical interlock, even with heavy doors and flaps Manual unlocking Condition monitoring Two switching contacts for monitoring the door position (actuator) and two for monitoring the door locking device (magnet) Manual release, emergency exit or emergency release Terminations Connector...

SOLENOID INTERLOCK AZM150 · AZM155 VARIABLE APPROACH LEVELS AND ACTUATORS APPROACH LEVELS Once the connection cover has been removed, the actuating head can be rotated in four 90° increments. This is how the actuator retracts from eight levels. The interlock adapts to any installation situation. Straight actuator Angled actuator Flexible actuator articularly suitable for sliding P safety guards Ideal for offset installations For hinged guards; closing radius adjustable via grub sc

DOOR HANDLE SYSTEM DHS150 FOR AZM150 AND AZM155 Easy to use Opening and closing hinged or sliding guards, flaps and hoods. Eyelet for padlocks The locking bar prevents the guard from closing accidentally during maintenance and servicing. Emergency exit ➊ Press the push button, ➋ Pull the release lever: The interlock is released, the actuator is pulled out of the interlock and the guard can be opened. Rear release of the interlock Opening a safety guard from outside the hazardous a

Flexible control concepts for greater safety: rotary knob, pushbutton and Bowden cable enable operation to be tailored to requirements, either inside or outside the hazardous area. Depending on where the solenoid interlock is installed, versions are available as an emergency exit or an emergency release. Bowden cable release Remote release for concealed installation with a T-handle. Available as an emergency exit or emergency release, depending on the installation location. I Rotary knob on the device Direct unlocking on the device. Available as an emergency exit or emergency release, depending...

Plastic actuating head Plastic housing Individual coding possible Power to unlock / Power to lock 4 contacts (2 actuators / 2 magnets) Manual release, emergency exit or emergency release Metal plug M12, 8-pin (only 24 VDC) Screw terminals Metal actuating head Magnet control with PWM Plastic housing Individual coding possible Power to unlock / Power to lock 4 contacts (2 actuators / 2 magnets) Manual release, emergency exit or emergency release Metal plug M12, 8-pin (only 24 VDC) Metal connector M12, 12-pole (only 24 VDC) Screw terminals Technical features

Monitoring Z Guard locking monitored 11 B Actuator monitored (variants ../02) 21 Other contact options available upon request

Monitoring Z Guard locking monitored 1 B Actuator monitored (variants ../02) 3) Other contact options available upon request 1) Variants 02/.., not in power to lock version

Connector plug M12 bottom Connector plug M12 left Standard coding Connector plug M12 right Connector plug M12, 8-pole, bottom Standard coding Connector plug M12, 12-pole, bottom Screw terminals Connector plug M12, 12-pole, bottom

Special features Other versions available upon request

■ Also with individual coding * Included in the scope of delivery of the solenoid interlock ■ Also with individual coding * Included in the scope of delivery of the solenoid interlock ■ Also with individual coding * Included in the scope of delivery of the solenoid interlock Countersunk head screws with one-way slot Flat-head screws with one-way slot ■ Countersunk head screws with one-way slot ■ Flat-head screws with one-way slot ACC-NRS-M5X12-CSS-2PCS 103051931 ACC-NRS-M5X14-FHS-2PCS 103033698 Centering device ■ For left hinged doors ■ For protective fences and guard doors ■ For right hinged...

■ Use outside the danger zone ■ For door frame thicknesses from 20 to 45 mm ■ For door frame thicknesses from 20 to 170 mm ■ Use within the danger zone ■ For door frame thicknesses from 20 to 45 mm ■ For door frame thicknesses from 20 to 170 mm ■ When using the ACC-AZM150-PT-T emergency exit with the DHS150 door handle system, the escape lever is also required. ■ To pull out the actuator after activating the emergency exit ■ Remote release via a wire rope ■ Can be used as emergency exit or emergency release ■ Length of sheathed steel core: 4 m ■ T-handle for Bowden cable release ■ Mounting plate...