WireStacker 1000 Passive Stacking Machine Low cost solution allowing unattended operation WireStacker 1000 stack wire up to a length of 3.0 m (10 ft.) Greatly reduces labour involved in handling long wires Passive design built for almost unlimited and trouble free cycles Feed through design for handling lengths longer than 3.0 m (10 ft.) Uses dedicated wire stacker interface on the EcoStrip 9300 / 9320, OmniStrip 9450, PowerStrip 9500 / 9550 and MegaStrip 9600 Extruded aluminium frame and all stainless steel construction Works equally well with short or long wires

The WireStacker 1000 is a passive wire stacking system witch guides and collects wires that have been processed with Schleuniger Cut & Strip Machines. The wire is fed through the ejector pipe of the wire stacker by the machine’s transport rollers. After processing each wire, the machine sends a control signal to the wire stacker making it drop the wire from the collection tube into the collection tray. The WireStacker 1000 can handle wires as small as 0.75 mm2 (22 AWG). Technical specifications Max. 25.4 mm outer diameter Workpiece Length up to 3000 mm (120”), longer lengths possible but cable...