*mydirectindustry

Catalogs
Schleuniger
Uni-S Aplicators Datasheet

Uni-S Aplicators Datasheet

Product catalog summary

Overview: The document provides detailed information about the Uni-S Applicators, which are universal crimp applicators designed for a wide range of terminal and feed types. These applicators are economically priced and feature rugged construction for durability and high-quality results.

Specifications:

Feed Type: Available in mechanical or pneumatic options.
Stroke: Options of 40 mm (1.57") or 30 mm (1.18"), with other strokes available upon request.
Conductor Cross-Section: Ranges from 0.08 to 6 mm² (28 to 10 AWG).
Crimp Height Adjustment: Increment of 0.025 mm (0.001") with a maximum of 1.5 mm (0.06").
Terminal Pitch: Minimum of 1 mm (0.04") and a maximum of 30 mm (1.18"). Pneumatic feed is recommended for pitches of 25 mm (1") or more.
Compressed Air Connection: 6 – 8 bar (90 – 110 psi) for pneumatic applicators.
Weight: 5 kg (11 lbs.).
Base Design: Features a 3-point base clamp with a male T-shaped ram adapter.

Concept: The Uni-S applicators are designed for side and end feed, banded terminals with open or closed barrel construction. They ensure precise tooling alignment for high-quality results and are suitable for both automatic wire processing systems and bench-top presses.

Options:

Additional tooling sets.
Cross-sectional images.
Insulation crimp assist.
Conductor strand gathering device.
Integrated wire funnels for closed barrel terminals.

Applications: The applicators can be used for side and rear feed terminals, mechanical or pneumatic feed, metal or plastic carrier strips, and various terminal types including open-barrel end ferrules, Mylar tape terminals, splice terminals, insulated end ferrules, dual-crimp applications, and machined contacts (4-indent crimp).

Important Note: Schleuniger recommends submitting wire samples if there is any doubt about the processing capabilities of a particular machine.

Contact Information: The document provides contact details for Schleuniger offices in Japan, Switzerland, Germany, the USA, and China.

Catalog excerpts

Uni-S Pneumatic Uni-S Mechanical Side Feed Uni-S Mechanical Rear Feed Uni-S Applicators Universal Crimp Applicators Economically priced applicators to handle practically all terminal and feed types Rugged construction and simple set up to ensure long life and high quality results Includes convenient micro-adjust dials, a 6-digit counter and one additional set of tooling For use on automatic terminating machines as well as benchtop crimping presses CRIMP APPLICATORS

Open the catalog to page 1

Uni-S Applicator Application Side and rear feed terminals Mechanical or pneumatic feed Metal or plastic carrier strip Front, middle or center carriers Open-barrel end ferrules (Wire clips) Mylar tape terminals Splice terminals Insulated end ferrules Dual-crimp applications Machined contacts (4-Indent crimp) The Uni-S family of applicators are designed for use with side and end feed, banded terminals with either open or closed barrel construction. The robust designs ensures precise tooling alignment for high quality results and easy setup. Schleuniger applicators are suitable for use on automatic...

Open the catalog to page 2

All Schleuniger catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list