*mydirectindustry

Catalogs
Schleuniger
STW 1100 Datasheet

STW 1100 Datasheet

Product catalog summary

Overview: The STW 1100 is a twisting station designed for use with the CrimpCenter, capable of being mounted in a crimping station or used as a standalone unit. It integrates fully with the CrimpCenter EASY operating software.

Technical Specifications:

Conductor Cross-Section: Up to 2.5 mm² (14 AWG), possibly up to 4 mm² (12 AWG) depending on wire.
Twisting Length: End 1: 4 – 18 mm (optional up to 23 mm), End 2: 4 – 18 mm.
Control: Programmable via CrimpCenter EASY software.
Power Supply: 24 V DC, 1.5 A.
Compressed Air: Minimum 6 bar, oil-free, filtered, and dry.
Dimensions: 80 x 315 x 160 mm.
Weight: ≤4.22 kg.
Compliance: Meets CE and EMC guidelines for safety and compatibility.

Concept: The STW 1100 is used for twisting conductor strands and can be paired with the STS 1100 tinning station. It features a compact design and can be quickly switched between twisting and crimping applications. Calibration settings and parameters are stored for ease of use.

Options:

Base frame for standalone use.
23 mm twist length option for Side 1.
Adapters for different applicator base plates.

Processing Capabilities: The STW 1100 can be configured with various CrimpCenter models for different applications, including Twist/Tin to Crimp, Twist/Tin to Seal/Crimp, Twist/Tin both ends, and Doubling Crimp.

Contact Information: Schleuniger has offices in Japan, Switzerland, Germany, USA, and China for sales and support.

Catalog excerpts

Twisting Station for CrimpCenter Can be mounted in the crimping station or used as a stand-along station Full integration and control via CrimpCenter EASY operating software Wire cross sections up to 2.5 mm² (14 AWG)

Open the catalog to page 1

Processing Capabilities The STW 1100 twisting station twists conductor strands and is typically used in conjunction with the STS 1100 tinning station. With its compact design, the STW 1100 can either be mounted as a stand-alone station or mounted in any crimping station using the standard quick-change applicator base plate. Changing applications from twisting to crimping is fast and simple. All of the necessary station calibration settings and processing parameters are stored in the software for future use. The gripper force can be adjusted according to the application. Whether used as a stand-alone...

Open the catalog to page 2

All Schleuniger catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list