SCHLEICH fa Advanced Test Technologies Safety and function testers } Expect more EN Safety and function testers

The GLP2-BASIC – the new standard! With the single- or multi tester GLP2-BASIC all kinds of electronic products can be inspected with today’s state-of-the-art technology. The 42 GLP2-BASIC types offer the perfect solution for a variety of measurement tasks and your individual requirements. Due to its many intelligent features the tester covers all application fields in the modern safety- and function test technology. It is perfectly suited for production, laboratory, test bench, quality assurance, automation and more. The possibility of flexible creation of test plans, entering test data e.g. the...

Application fields Laboratory | manual test program The GLP2-BASIC is immediately ready to perform your measurements. With the unique manual mode, all integrated test methods can be directly started. A pre-parameterization of measurements is not necessary. Only the requested test method has to be selected and then the test process can be immediately started. The software continuously provides the currently measured values, similar to a multimeter. Your test object can be immediately evaluated in detail. Even long-term analyses, from hours to days and weeks, may be performed in this mode. Production...

State-of-the-art technology combined with ergonomic design The standard equipment Design • • • • • • • • Brilliant, high-contrast 7”-TFT-Color display 800 x 480 Pixel Color-marked test steps Color-marked test results for facilitated reading PCAP touch of the latest technology (capacitive touch display behind scratch-proof glass) Numerous languages to choose from Test socket installed on the front On request, additional test connections on the rear side Interface connections on the rear side Manual test sequence Semi-automatic test sequence Full automatic test sequence 4 GB database storage capacity...

Technical data Article number • basic equipment O optionally available for an additional charge — not available > Note: Further accessories please find from page 22 onwards GB30: Earth/Ground-bond resistance test 30 A IR: Insulation resistance test HVAC 6/3: High-voltage test AC 50-6000 V, 3 mA safety current limiting HVAC 6/100: High-voltage test AC 50-6000 V, 100 mA HVDC 6/4: High-voltage test DC 50-6000 V, 4 mA safety current limiting HVDC 6/100: High-voltage test DC 50-6000 V, 100 mA LC: Leakage current test ELC: Equivalent leakage current test Fct5AC: Function test 5 A, AC Fct5DC: Function...

Technical data Earth/Ground-bond resistance The PE/GB test is carried out with an electronically-controlled, constant test current. The tester calculates the PE/GB resistance from the voltage drop and the flowing current. The PE/GB resistance may not exceed the maximum resistance defined in the standards. By means of a test probe (to be ordered separately) the operator contacts the test object's PE/GB connections one after another. The measurement is performed between the PE/GB-contact in the test socket and the test probe. The insulation is inspected with electronically-controlled, constant...

Technical data Function test High-voltage AC The insulation is inspected with electronically-controlled, constant high-voltage. During the test the test current may not exceed a preset maximum value. In case the current exceeds the maximum value, the test procedure is automatically interrupted. The test object is discharged at the end of each test. Further information: www.schleich.com/en/basic SCHLEICH B Advanced Test Technologies

Technical data Leakage current Continuity and short-circuit The leakage current test is performed during the function test. It is measured, if the leakage current from conductors L+N to PE (ground leakage current) or to insulating parts of the housing is not too large. The leakage current may not exceed the maximum current defined in the standards. To inspect the housing's leakage current, the operator contacts the housing parts to be tested one after another by means of a test probe. Further information: www.schleich.com/en/basic SCHLE1CH B Advanced Test Technologies

Switchover of test methods and mechatronics insulation resistance earth/ground-bond resistance Test method switchover L Test socket/connection points Test technology from SCHLEICH has already proven itself a thousand times in the daily work. It belongs to the most reliable products on the market and provides outstanding performance and accuracy. The aim should be, to carry out measurements as fast and as efficient as possible. Only this offers a considerable benefit for the operator. To save time, all test object´s connections are connected to the test socket. Afterwards the tester automatically...

Editing test plans Commonly, test programs are generated directly at the tester. Alternatively, you may also manage, edit and save test plans on a PC by using the Editor&Printer software. Generating test plans on a PC offers the advantage, that the current production is not influenced by possible changes, as there are no interruptions at the single testers and the work may be continued. The PC-software's design and structure is similar to the one in the tester. So the operation is almost equal and thus easy to learn. The software is used under two working conditions: • Data exchange via USB-memory...

Analyzer The statistical analysis When running an analysis, test results are summarized in a way, that you receive an overview over your production´s quality. To reduce the quantity of test results to be inspected, numerous filter criteria may be entered: • Time period specification: Date from…to • Time period specification: Time from…to • Time period specification: Calendar week from…to • Serial number from…to • Test plan description • Order data • Definition of single testers • Definition of tester groups Storing test results on a PC Fast, effective Microsoft SQL-Express database Database suitable...