SCHLEGEL electronic materials a member of GME!Group

Doubleshield Pad 1. Introduction Grounding products should ensure electrical performance without breaking under mechanical or environmental stress throughout the life time of the product. Doubleshield Pad ensures reliable grounding performance in electronic applications. The Pads are delivered in tape-and-reel packaging for automated placement and soldering reflow using standard SMT equipment. Features and benefits The flexible and easily compressible Pad can to take up tolerances and close the gap between a PCB and another component in addition to providing a reliable grounding contact. SMT...

SCHLEGELelectronic materials a member of GME!Group Doubleshield Pad 3. Product dimensions The Doubleshield Pad is delivered in three different versions but different cross sections and length can be developed to fit any demand. *RCS - Recommended compression stop The recommended operating temperature is between -55°C and +125 °C. To assure a safe and repeatable compression Schlegel recommend the use of mechanical compression stops allowing a compression degree of 20 - 25%. Minimum 10% and maximum 50% compression is recommended. The Schlegel Doubleshield Pad fulfil the requirements set by the...

Compression force The compression force versus compression degree is shown in the graph below. Electrical resistance The electrical resistance versus compression degree is shown in the graph below.

Doubleshield Pad 7. Packaging The Doubleshield Pad is packaged and delivered in tape-and-reel. 8. Storage conditions The product is delivered in sealed plastic bags and the products are as such considered as MSL-1 with an unlimited storage time. This assumes that the storage is indoors to protect the product from rain and direct sunshine and at a temperature between 5 and 30°C and a relative humidity of 20-80%. 9. Disclaimer The data given in this product information should be taken only as a guide and not a specification. The recommendations and data given are based on our experience to date,...

www.schlegelemi.com NORTH AMERICA Schlegel Electronic Materials, Inc. 1600 Lexington Ave Suite 236A Rochester NY 14606 Tel No: +1 585-643 2000 Fax No: +1 585-427 7216 Email: [email protected] EUROPE Schlegel Electronic Materials, bvba Slijpesteenweg 28 8432 Middelkerke (Leffinge) Belgium Tel No: +32 59 560 270 Fax No: +32 59 560 271 Email: [email protected] ASIA Schlegel Electronic Materials Asia Limited Unit 3, 3/F, Block A, New Trade Plaza, 6 On Ping Street, Shatin, N.T., Hong Kong Tel No: +852-2686 9872 Fax No: +852-2686 9728 Email: [email protected] Schlegel...