TWIN Profile shaping machine  Equipped with 9 profiling stations and cassettes for pivoting and fast profile changing. In addition to the advanced application area, the increased number of shaping stations allows an even better profile result.  The cassettes can be installed for the following profile combinations by the Schlebach factory: 2 x double standing seam profile 25 mm for profile shaping two‐sided male or female in one work cycle 2 x double standing seam profile 25 mm with clip relief for profile shaping two‐sided male or female in one work cycle  Profile combination of double standing seam profile 25 mm with an

 Even the basic machine model comes equipped with a PLC touchscreen control in order to provide positioning with millimeter precision and electrically powered roller shears to perform automatic cutting.  The following accessories are available:  The hydraulic shear (HYT) that is installed in the exit area of the profiling machine consists of hydraulic cylinders that are installed on both sides, case hardened profile guides, an upper cutter bar with a HSS half‐section knife system as well as a lower cutter bar with hardened disposable cutting strips that may be used on four sides. The profile...

 Cross‐cutting assembly QA‐60 for oblique cuts on profiled panels is made of non‐ferrous metals. The assembly consists of a stable welded base frame, a swivelling table with carriage and a high‐ quality circular saw made by Bosch that is supplied with special blades for copper (type SBC with a hard chrome finish) or alternatively aluminium and titanium zinc (type SBS with steam‐treated surface). The cutting angle across the profile shaping direction is continuously adjustable from 0° to + / ‐ 60°. The connecting components required to flange the assembly to a profile shaping machine are delivered...

 Ribbing attachment assembly to shape longitudinal ribs with a width of 25 mm (alternatively 58 mm or pencil ribbing) and a depth of approximately 1.1 mm into the visible surface of profiled panels. The ribbing attachment assembly consists of a guide unit, upper and lower ribbing rollers with brackets. The ribbing attachments assemblies are equipped with high‐quality ribbing rollers on ball‐bearings to ensure maximum protection of the panel surface being profiled. The ribbing attachments are continuously adjustable across the profile shaping direction. This ensures that the distance of the ribs...

 Technical specifications Supply voltage Drive power Operating speed Forming stages Length of the shortest panel Adjustment range Infeed height Dimensions (L x W x H) Weight Processable materials 230 V / 50 Hz / 1 Ph. Alternatively: 115 V / 50 Hz / 1 Ph. 115 V / 60 Hz / 1 Ph. 1.1 kW 11 m/min 9 stations 500 mm 260 mm – 740 mm infeed width 900 mm 2358 mm x 1758 mm x 1277 mm 1030 kg Titanium zinc up to 0.8 mm Copper up to 0.8 mm Aluminum up to 0.8 mm Sheet steel (galvanized and coated) up to 0.7 mm Stainless steel up to 0.5 mm Schlebach‐Maschinen GmbH Nisterberger Weg 13 D –