Profile technology
1 / 20Pages

Catalog excerpts

Profile technology - 1

Schlebach Maschinen GmbH Nisterbergerweg 13 • 57520 Friedewald • Tel.: +49 (0) 27 43 / 92 07-0 • E-mail: info@schlebach.de • www.schlebach.de Profile technology for all roofs of the

Open the catalog to page 1
Profile technology - 2

Schlebach has been active in standing seam technology for more than 40 years now Schlebach profile shaping machines Mini Light I Mini Prof Mini Prof Plus I Mini RSM Mini series technical data SPM and PMC versions Automatic profiler SPAl/lPAC Profile selection list 16 Schlebach notching stations KLS 20 Notching stations technical data 23 Schlebach round arch curving machines Round arch curving machine RBM 25, 32 and 38 24 Round arch curving machine RBM 50 and RBM 38/50 25 Seaming and edge bending machines 26-27 Schlebach slitting machines SLMSS 1250 30 KONI 2000 I Techn. data 33 Special...

Open the catalog to page 2
Profile technology - 3

Profile shaping profile shaping machines Mini-Light profile shaping machine i Facts Light and demountable profile shaping machine Consists of 5 components and can be mounted or demounted in no time Suitable for all hard-to-reach construction sites Is even suitable for the smallest of workshops Small, light and universal: The Mini series Can be demounted and carried by two people Facts The least expensive profile shaping machine model Ideal choice for short, conical or tapered panels Minimum panel length 200 mm / depending on the material Smallest axial dimension 50 mm Two work cycles...

Open the catalog to page 3
Profile technology - 4

__NI PROF PLUS profile shaping machii profile shaping machi Profile shaping & Compact version with all necessary accessories & Mechanical length measuring device in cm gradation, tolerance 1 - 2 cm & Roller shear to perform manual cross cuts ahead of profile shaping & Roller blades LS to perform longitudinal cuts of parallel fitting panels ahead of profile shaping & Decoiler for 300 kg coil weight ^ facts & Compact version & Motorised roller shear to perform cross cuts ahead of profile shaping & Control panel via touch screen length measurement in mm gradation & Roller blades LS to perform...

Open the catalog to page 4
Profile technology - 5

Profile shaping The SPM and PMC profile shaping machines Clip relief Profile shaping machine SPM RS-AC Profile shaping machine SPM RSM The robust SPM and PMC series The versions of this Schlechbach profile shaping machine series are used for producing double standing seam profiles with a height of 25 mm of 32 mm, optionally with clip relief or standard. The SPM/PMC has a modular design and can be retrofitted with additional elements, even at a later point in time. Profile shaping machine SPM LM-QA 60 SPM-RS / PMC-RS profile shaping machine SPM-RSM / PMC-RSM profile shaping machine SPM LM-QA...

Open the catalog to page 5
Profile technology - 6

Profile shaping profile shaping machine SPA / Pac SPM-KS / PMC-KS Standard profile shaping machine for conically profiled panels directly from the coil Clip relief The High End Version SPA / PAC The SPA / PAC profile shaping machine is used for maximum performance and continuous operation. Cutting and profile shaping can be undertaken from narrow to wide or from wide to narrow depending on how the panels are laid. SPM-KS profile shaping machine with touch panel control The adjustment side of the machine can be set to the required angle for slanted panels or locating strips. Facts Robust and...

Open the catalog to page 6
Profile technology - 7

Profile shaping Clip relief single sided Z-shape The compact, versatile profile shaping machine Robust machine variant from the SPM series with cassettes populated on both sides for pivoting FACTS Ef Robust compact machine to produce hem seams on flues, for water folds, verges, etc. Ef Stepless width adjustment from 130 to 870 mm (alternatively 1,050 mm) Ef Fold-over length 6 - 15 mm Ef Reduces working time when bending Ef Closed and open fold-over possible Ef Z-shape with 2 x pass Ef Hem seam rotated by 180° as a special variant 2 x double standing seam profile 25 mm for profile shaping...

Open the catalog to page 7
Profile technology - 8

Profile shaping !0 TP, QUADRO XL, QUADRO XXL UADRO KS . The smart, versatile profile shaping system The shortest of changeover times are achieved thanks to pivotable cartridges with 10 / 12 roller stations. Equipped with a PLC control system with touch panel and an electrically driven cross cutting roller shear, the machines from the Quadro series operate fully automatically to process pre-selected lengths and quantities. so QUADRO PACTS TP / QUADRO XL / QUADRO XXL / QUADRO KS Ef Robust, versatile and multifunctional Ef User-friendly PLC control with touch panel [yf Stepless width...

Open the catalog to page 8
Profile technology - 9

Cartridge panel Plug-in panel SNAP-folded profile with clip relief 25 / 38 Stepped-tile panel Windowsill profile included, optionally available, - not supplied Special profile WHICH PROFILE CAN WE IMPLEMENT FOR YOU? QUADRO TECHNICAL DATA Soffit panel Plug-in seam panel Eaves profile t1 Click performance profile QUADRO QUADRO XL QUADRO XXL QUADRO KS Material thicknesses: Steel (320 N/mm2) 0.55 - 0.70 mm Non-ferrous metals 0.6 - 0.8 mm or 0.8 - 1.0 mm or 1.0 - 1.2 mm (optional, must be specified when ordering) Stainless steel 0.5 mm Fagade profile

Open the catalog to page 9
Profile technology - 10

STA/STA“M angle cross cutting system AK-QUAD and AK-QUAD 4 notching unit Ef Ef Ef FACTS Ef Cuts after profile shaping for a variety of profiles Ef Sheets must be notched in the side area ahead of profile shaping (AK-Quad) Ef Profiles can be cross cut in the angular range +/- 60 ° Ef Optionally with hand roller shears or motor-driven shears Ef Operation via PLC touch control of the Quadro Ef Cutting after profile shaping for standing seam 25 and 38 mm with and without clip relief Ef Motorized with customer's own drive Ef Production of short profile panels over 100 mm in length Ef Operation...

Open the catalog to page 10
Profile technology - 11

Notching/folding back notching unit Electrohydraulic notching units KLS, KLS 90 and EHA For quick and efficient mechanical assembly preparation of pre-profiled panels of the double standing seam 25, 32 and 38 mm with and without clip relief for roofs, dormers, fapades and parapets. KLS notching unit ^ FACTS & Notching of a round cutout in optionally 25, 32 and 38 mm profile height, standard or with clip relief & Notching and feeding-forward of parallel, tapered and trapezoidal profile panels & Application areas eaves and roof inflexion points, channels, monopitch roofs, fapade bases,...

Open the catalog to page 11

All Schlebach GmbH catalogs and technical brochures

  1. TWIN

    5 Pages

  2. MINI-PROF

    5 Pages

  3. MINI-LIGHT

    5 Pages

  4. EPM-25

    2 Pages

  5. SCHLEBACH

    32 Pages