MINI-PROF
5Pages

MINI-PROF Profiling machine Profile technology for all roofs of the world The ideal profiling machine for parallel and conical panels The purpose of the profiling machine MINI-PROF is to produce double standing seam profiles 25 from blanks or cut lengths in a single pass. It is designed as a universal machine for the entry-level users or as a backup machine for onsite work. The infeed width is continuously variable from 240 mm to 850 mm to cater for a wide range of applications. The axial dimension of the profiled panels that are produced by a parallel run of the MINI-PROF ranges from 170 mm to 780 mm, taking into account a seam loss of about 70 mm. A single-sided run can produce conical and oblique panels or infill strips from a centre to centre distance of 50 mm. The length of the shortest panel is approx. 500 mm. The production rate is 11 meters per minute. After adjusting the infeed guides to match the width of the cut, the profile shaping drive is turned on via the main switch and the cuttings or panels are then fed manually into the profiler while the drive is running. The profiling units (tie-bars) with 7 shaping levels are built on a torsion-proof steel frame. The strip or sheet material is guided by lateral infeed guides on ball-bearings on the fixed, as well as the adjustable side. These are adjustable to set the outer edges of the profile. The profile rollers are made of high quality special steel and surface treated. This special treatment provides the rollers with a high level of corrosion and wear protection. The bearings of the upper profile rollers have resilient mounts in order to adapt to the material thickness. This ensures an impression-free and low-wear production of the panels. The machine is equipped with two plug-in carrying handles and is movable. The working height of the machine is adjustable from 670 mm to 870 mm. For this purpose, the two footrests and the castors may be extended and locked in place. To transport the machine, the infeed guides can be folded down. Furthermore, it can also be moved by a crane using the eye-bolts that are supplied

Supply voltage Drive power Operating speed Forming stages Shortest panel length Infeed width Axial dimension Infeed height 230 V / 50 Hz / 1 Ph. 115 V / 50 Hz / 1 Ph. 115 V / 60 Hz / 1 Ph. 1.1 kW 11 m/min 7 stations 500 mm 240 - 850 mm approx. 170 - 780 mm (depending on the material) 670 - 870 mm (continuously variable) Processable materials Titanium zinc up to 0.8 mm Copper up to 0.8 mm Aluminium up to 0.8 mm Sheet steel (galvanized and coated) up to 0.7 mm Stainless steel up to 0.5 mm

Possible profiles Standing seam 25 Width dimension "A" approx. 170 - 780 mm (parallel) - One run Width dimension "A" approx. 50 - 160 mm (seperately) - Two runs 1st run "male" / 2nd run "female" Standing seam 25 angled Width dimension "A" approx. 170 - 780 mm (parallel) - One run Width dimension "A" approx. 50 - 160 mm (seperately) - Two runs 1st run "male" / 2nd run "female" Standing seam 25 conical Width dimension "A" approx. 50 - 700 mm / Width dimension "B" approx. 50 - 700 mm (seperately) - Two runs 1st run "male" / 2nd run "female" Standing seam 25 both sides "female" Width dimension...

Accessoires Guideboy Additional material guide for single-sided profile shaping of panels. The installation of the guideboy on any of the Schlebach profile shaping machine infeed guides requires little effort. The Guideboy prevents the sheet material from shifting towards the centre of the machine during single-sided profile shaping operations. The required lateral force across the profiling direction may be adjusted by means of the directional angle, as well as an increase of the contact pressure on the sheet metal.

Damage to the material surface is ruled out by the use of high quality pressure rollers with a special rubber coating. Ribbing attachment 25 mm Ribbing attachment assembly to shape longitudinal ribs with a width of 25 mm and a depth of approximately 1.1 mm into the visible surface of profiled panels. The ribbing attachment assembly consists of a guide unit, upper and lower ribbing rollers with brackets. Note: The profiling of ribs is not possible on conical shapes. The ribbing attachment assemblies are equipped with high-quality ribbing rollers on ball-bearings to ensure maximum protection...