Ready for a new level?
8Pages

schlatter Ready for a new level? The latest mesh welding machines for highly flexible and productive reinforcement mesh production

Reinforcing mesh production method of the future Systems MG316 and MG800: Production of reinforcement mesh on a new level This system concept takes reinforcement mesh production to a whole new level of efficiency with only limited machinery, a small footprint, low personnel costs and low warehouse inventory. 80-100,000 tons with only two mesh welding machines Schlatter is taking mesh production to a new level. An annual production of 80-100,000 tons is achieved with just two mesh welding machines – all while manufacturing countless different varieties of mesh with many different wire...

Limited machinery required This “new level" concept will revolutionise conventional mesh production. Now, the production volume that would normally require 4 to 5 machines can be achieved using just two mesh welding units. By drastically cutting down on the retooling and coil change times, the effective production time of the machines is increased by up to 50%. Low personnel costs and small footprint Fewer machines means less manpower, lower maintenance and energy costs. At the same time, there's a significant reduction in the space requirements and spares inventory, which ties up capital....

Straightening and cutting machine MRM System MG800 for highly flexible and productive reinforcement mesh production The MG800 is a mesh welding machine designed to be used wherever highly flexible and highly productive reinforcement mesh manufacture is required. This new machine concept raises the bar; to run reinforcement mesh production efficiently with less machinery, less space, low labour costs and low inventories.

High productivity • High speed straightening and cutting machine (9m/s) • High speed welding at 150 cross wires per minute • No down time for welding machine between meshes • Change over of wire diameter within 30 seconds • No down time by changing the mesh geometry with unchanged wire diameter • 30 seconds down time for coil changes if the same diameter is set up at two payoffs High flexibility • Line wire spacing in multiples of 50mm • Cross wire from above and below, no turner needed • Up to 6 different diameters for line and cross wire High mesh quality • High quality straightening and...

Roller pull-in element The mesh welding system MG316 is now even more powerful and efficient The new MG316 is designed to manufacture reinforcement mesh in sheets and rolls, as well as mine mesh efficiently. For this type of production, the machine concept is characterized by very high productivity, low operating costs and simple operation.

Cross wire feed with gripper System MG316 The MG316 works with a powerful line wire feed-in device and highly efficient straightening and cutting machine for the cross wire. The cross wire is inserted over or under the line wires using an optimised method. This way, production speeds up to 200 cross wire per minute can be achieved easily. Since the cross wire is fed over or under the line wires, there is no need for a turning process. Among other benefits, this has a positive effect on the production output for short panels. The design of the new welding machine with single welding groups...

A reliable partner in plant construction The Schlatter Group is a world leader in plant manufacturing for resistance welding systems for specialized solution in the field as well as weaving and finishing machines for paper machine clothing, wire and mesh. With our long-standing expertise in industrial engineering, our spirit of innovation and our reliable customer service we offer our customers highperformance and high-quality manufacturing systems. Experience in plant design Weaving segment The combined competence in the fields of welding, weaving and industrial engineering makes the...