Metering Dispensing Systems
13Pages

SCHEUGENPFLUG AG METERING AND DISPENSING TECHNOLOGY Metering and Dispensing Systems 04 l 15 Metering and Dispensing Systems for your economic efficiency There are many different metering and dispensing systems available today, which all satisfy the needs of different types of tasks. As a result, it is becoming difficult to compare the different systems and methods with one another. We offer the right system for each requirement and help you to turn your metering and dispensing task into an economically efficient process. The tiniest variations in the dispensing process and a slightly inhomogeneous dispensing medium can compromise the quality of your manufactured workpieces. Therefore, it is imperative to keep metering parameters at a specified level and make sure that dispensing always remains constant to ensure the final parts are robust and durable. The core criterion for efficient manufacturing is process reliability. Process reliability in turn depends on the right choice of metering and dispensing system. Irregularities or interruptions in the dispensing process greatly influence the economic efficiency of your entire production line. Metering and the subsequent dispensing of casting resins for potting, filling or bonding is among the final steps of the production process. If the resin quantity is not accurately metered or the adhesive not precisely applied, the workpiece may be unsuitable for use. All added value created in upstream production steps is irretrievably lost. Rejects caused at this point of the value chain are therefore extremely uneconomical. (The page references refer to the general catalogue.) The traditionally simple yet rugged build of our machinery combined with technologically advanced elements give you the peace of mind you need for production. Depending on your application's parameters and the dispensing material to be used, you can choose the system which best matches your process engineering requirements at the best price-performance ratio. Perfectly constant metering quantities, a consistently sustained mixing ratio, reliable airtight machine parts and high availability: These are the major characteristics of our metering and dispensing technology. They are the result of over 25 years' experience in the dispensing of resins and adhesives.

Piston Metering Systems ∧ Dos P ∧ Alternating Metering Dos P-A ∧ Multi-Nozzle Metering Dos P-X ∧ Extras and Optional Features ∧ Small Quantity Dispensers Dos PM Gear Pump Dispensers ∧ Dos GP Small and Micro Quantity Dispensers ∧ Dos Jet, Dos Dot – Electropneumatically Controlled ∧ Dos PMU – Piezo Controlled

Piston Metering Systems – precise, robust, durable The Dos P piston dispensers are volumetric dispensing systems designed to work with 1C and 2C materials. These dispensing systems are extremely accurate and offer a constant mixing ratio, which guarantees highest process reliability. The systems of the Dos P series are all based on a robust mechanical engineering principle and are available in different sizes and models. Their metering cylinders are perfectly dimensioned with regards to the required volume and mixing ratio. An added benefit for even higher process reliability is the fact...

The Tried and Tested classic The Dos P in its basic configuration already covers a wide spectrum of requirements and additionally offers several configurations for different volumes. Thanks to optional features such as valve monitor- ing, mixing tube heating, dispenser heating and the models "Alternating" »-seepage3o and "Multi- Nozzle" *-seepage3i this system can be adapted flexibly to any new requirement. very good + = good (+) = limited Contact us for more information: (The page references refer to the general catalogue.)

Uninterrupted large Quantity dispensing The Dos P-A is the system of choice if large quantities have to be applied quickly. In this design, one cylinder pair is loaded while the other is discharged. This allows the output of large quantities of dispensing material in very short times. Filling time is no longer an issue. Therefore, this system is ideal for filling large quantities or applying long beads of sealants or adhesives (continuous dispensing). Dos P-A, Model P050 technical data: • Weight: 34.5 kg • Width: 395 mm • Height: 585 mm • Depth: 130 mm • Heating: up to 80°C Function...

Ultimate Performance with a small footprint For additional requirements such as e.g. large numbers of pieces or extremely short cycle times, multinozzle piston metering systems are used. These systems can fill several workpieces in a single filling procedure/cycle. They are therefore particularly suited for processing a large number of small workpieces, especially when dispensing in a vacuum. Their unrivalled performance is the result of dividing the evacuation and ventilation time between many parts. Multi-nozzle piston metering systems are made of several functionally interconnected...

Extras and Optional Features for the Dos P Systems Optimum Metering and Dispensing Process For an Let's talk about your project: +49 9445 9564 ext. 0 vertrieb.de@scheugenpflug.de Multi-Nozzle Dispensing Mixing Tube Heating on Supporting Sleeve Metering Needle Guide Plate Camera for Metering Needle Monitoring Mixing Tube Valve Measuring Adapter Valve Monitoring Metering Head Heating (The page references refer to the general catalogue.)

High Precision for small and micro quantities Dos PM, the metering and dispensing system for small quantities, includes all performance features of the Dos P model line, but is optimised for dispensing quantities between 0.005 and 0.04 ml, using 1C media. It is used for applying dots or beads, for filling, for dam&fill applications, and for encapsulating, e.g. chips on a smartcard leadframe. Dos PM extras: • 12-nozzle or 16-nozzle dispenser Dos PM technical data: • Weight: • Width: • Height: • Depth: • Heating: • Max. volume/shot 1C: Dos PM Piston Dispenser 1 part, 16 nozzle (1C/16)...