Scheugenpflug AG Metering and Dispensing Technology Material Preparation and Feeding 04 l 13 Material Feeding Unit A90 c | a90 b | a90 t Highly viscous

economic FEEDING OF DISPENSING MATERIAL FOR SMALL BATCH AND LIMITED LOT PRODUCTION Standard cartridges of different sizes can be used Outstanding performance for price COMPACT WITH A SMALL FOOTPRINT Material Feeding unit A90 C | A90 B | A90 T PROMPT DELIVERY TIMES Die beiden Kolbenpaare ermöglichen durch ihren alternierenden Betrieb ein kontinuierliches Dosieren. Ein Kolbenpaar wird befüllt, während das andere ausgedrückt wird. Dadurch werden große Vergussmengen in sehr kurzer Zeit ausdosiert. A90 C and B work with standard cartridges of different sizes Data sheets on request. Set-up example:...

Highly viscous Vacuum Vakuum Material Feeding unit A90 C | A90 B | A90 T Compact Material Feeding Unit for Easy Dispensing Tasks Under Ambient Air Conditions. Using the material feeding unit A90 ensures the steady and uninterrupted feeding of dispensing material. To meet the different requirements possible in the dispensing process, there are three models available. Material is loaded from cartridges or from pressure tanks. Used for | Materials: • One and two component • Low to highly viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Usage: Easy dispensing tasks under ambient...

CONSISTENT MATERIAL QUALITY Independent of the size of the production batch Ultimate process reliability Minimal Material Waste Using stored resins is possible without limitations thanks to degassing during the process Degassing and Feeding Unit A90 D Highest Requirements for the Manufactured Parts Need Absolutely Air-Free Dispensing Material. Preventing air bubbles in the dispensing process increases production quality. Air bubbles trapped in the material during storage, transportation or filling by the manufacturer considerably increase the risk of faulty dispensing. Ideally, highly viscous...

Control Unit SCP200 Control Unit for Material Preparation and Feeding Units and for Manual Work Stations. All material preparation and feeding systems as well as the manual work stations are equipped with the specially designed microcomputer controller SCP200. It monitors and controls all steps of the production process, from the docking of the follower plate, over the feeding of the dispensing material into the system, to the actual metering and dispensing itself. Operation is purely intuitive, i.e. a brief instruction of operators during the first equipment start-up is usually enough training....

Scheugenpflug AG Gewerbepark 23 93333 Neustadt a. d. Donau Scheugenpflug Resin Metering Technologies Co., Ltd. 1st Floor, BLK 3 No 35 Hong Feng Road Suzhou 215021 Scheugenpflug Inc. 975 Cobb Place Boulevard, Suite 218 Kennesaw, Georgia 30144 Sales Partners Benelux Exmore Benelux bvba Ketelaarstraat 8 2340 Beerse ATRA S.r.l Via Roveredo 1/A Z.I. Paradiso 33170 Pordenone Ostec Enterprise Ltd. Moldavskaya str. 5/2 121467 Moscow Czech Republic / Slovakia AMTECH spol. s r. o. Palackého tˇrída 153b 621 00 Brno ETC CO.,LTD. Daehyun Techno-World. # 1206 174 Ohjeon-Dong, Uiwang-Si, Kyunggi-Do, Korea (437-753)...