Scheugenpflug AG Metering and Dispensing Technology Material Preparation and Feeding 04 l 13 Material Feeding Unit A220 Highly viscous

Patented Vacuum Barrel Follower Plate Prevents unnecessary material consumption during barrel change-over Continuous material flow thanks to smoothed surface No extra vacuum chamber needed No manual evacuation necessary Fully automated docking Procedure Material Feeding unit A220 Docking takes less than 5 minutes Fully automated pressure regulation Automatic control and monitoring function Interpolation of static and dynamic pressure Ergonomic barrel change-over Slide-out hobbock drawer for easy barrel change-over Control Unit Scheugenpflug SCP200 Simple operation through selfexplanatory controls...

Highly viscous Material Feeding unit A220 Reliable Material Feeding Unit for Highly Viscous Dispensing Media. Loading of Material From 20-Litre Drums With the Patented Scheugenpflug Barrel Follower Plate. The barrel (hobbock, pail) is positioned on the ergonomic hobbock drawer. After closing the safety door, the operator initiates docking via the controls. This lowers the vacuum barrel follower plate into the drum where the follower plate attaches itself onto the material surface without trapping air. The actual material feeding is done by a scooping piston pump. It starts fully automatically....

PREVENTION of unnecessary MATERIAL consumption No contamination with encrusted material residues from previously used drums or barrels (disposable product) Minimal material waste per barrel change Nearly complete emptying of drums and barrels BUBBLE-FREE DOCKING Vacuum Barrel Follower Plate for A220/A280 Ultimate process reliability RAPID barrel CHANGE-OVER Fully automated docking No mechanical removal of product residues needed No manual evacuation necessary during barrel change-over The specially designed A220/A280 systems supply highly viscous media. Intelligent Investment for Ongoing Production...

CONSISTENT MATERIAL QUALITY Independent of the size of the production batch Ultimate process reliability Minimal Material Waste Using stored resins is possible without limitations thanks to degassing during the process Degassing and Feeding Unit A90 D Highest Requirements for the Manufactured Parts Need Absolutely Air-Free Dispensing Material. Preventing air bubbles in the dispensing process increases production quality. Air bubbles trapped in the material during storage, transportation or filling by the manufacturer considerably increase the risk of faulty dispensing. Ideally, highly viscous...

Control Unit SCP200 Control Unit for Material Preparation and Feeding Units and for Manual Work Stations. All material preparation and feeding systems as well as the manual work stations are equipped with the specially designed microcomputer controller SCP200. It monitors and controls all steps of the production process, from the docking of the follower plate, over the feeding of the dispensing material into the system, to the actual metering and dispensing itself. Operation is purely intuitive, i.e. a brief instruction of operators during the first equipment start-up is usually enough training....

Scheugenpflug AG Gewerbepark 23 93333 Neustadt a. d. Donau Scheugenpflug Resin Metering Technologies Co., Ltd. 1st Floor, BLK 3 No 35 Hong Feng Road Suzhou 215021 Scheugenpflug Inc. 975 Cobb Place Boulevard, Suite 218 Kennesaw, Georgia 30144 Sales Partners Benelux Exmore Benelux bvba Ketelaarstraat 8 2340 Beerse ATRA S.r.l Via Roveredo 1/A Z.I. Paradiso 33170 Pordenone Ostec Enterprise Ltd. Moldavskaya str. 5/2 121467 Moscow Czech Republic / Slovakia AMTECH spol. s r. o. Palackého tˇrída 153b 621 00 Brno ETC CO.,LTD. Daehyun Techno-World. # 1206 174 Ohjeon-Dong, Uiwang-Si, Kyunggi-Do, Korea (437-753)...