Material Feeding A280
7Pages

Scheugenpflug AG Metering and Dispensing Technology Material Preparation and Feeding 04 l 13 Material Feeding Unit A280 Highly viscous

Patented Vacuum Barrel Follower Plate Prevents unnecessary material consumption during barrel change-over Continuous material flow thanks to smoothed surface No extra vacuum chamber needed No manual evacuation necessary Material Feeding Unit A280 Fully automated docking Procedure Docking takes less than 5 minutes STURDY DOUBLE PISTON PUMP Continuous feeding of highly abrasive dispensing materials Ergonomic Barrel change-over Slide-out hobbock drawer Control Unit Scheugenpflug SCP200 Simple operation through selfexplanatory controls on touch screen display Material feeding unit A280 two...

Highly viscous Material Feeding Unit A280 Rugged Material Feeding Unit for Highly Abrasive Dispensing Media With High Viscosity. Loading of Material From 20-Litre Drums With the Patented Scheugenpflug Barrel Follower Plate. The barrel (hobbock, pail) is positioned on the ergonomic hobbock drawer. After closing the safety door, the operator initiates docking via the controls. This lowers the vacuum barrel follower plate into the drum where the follower plate attaches itself onto the material surface without trapping air. The double piston pump of the A280 is optimised for highly viscous and...

PREVENTION of unnecessary MATERIAL consumption No contamination with encrusted material residues from previously used drums or barrels (disposable product) Minimal material waste per barrel change Nearly complete emptying of drums and barrels BUBBLE-FREE DOCKING Vacuum Barrel Follower Plate for A220/A280 Ultimate process reliability RAPID barrel CHANGE-OVER Fully automated docking No mechanical removal of product residues needed No manual evacuation necessary during barrel change-over The specially designed A220/A280 systems supply highly viscous media. Intelligent Investment for Ongoing...

CONSISTENT MATERIAL QUALITY Independent of the size of the production batch Ultimate process reliability Minimal Material Waste Using stored resins is possible without limitations thanks to degassing during the process Degassing and Feeding Unit A90 D Highest Requirements for the Manufactured Parts Need Absolutely Air-Free Dispensing Material. Preventing air bubbles in the dispensing process increases production quality. Air bubbles trapped in the material during storage, transportation or filling by the manufacturer considerably increase the risk of faulty dispensing. Ideally, highly...

Control Unit SCP200 Control Unit for Material Preparation and Feeding Units and for Manual Work Stations. All material preparation and feeding systems as well as the manual work stations are equipped with the specially designed microcomputer controller SCP200. It monitors and controls all steps of the production process, from the docking of the follower plate, over the feeding of the dispensing material into the system, to the actual metering and dispensing itself. Operation is purely intuitive, i.e. a brief instruction of operators during the first equipment start-up is usually enough...

Scheugenpflug AG Gewerbepark 23 93333 Neustadt a. d. Donau Scheugenpflug Resin Metering Technologies Co., Ltd. 1st Floor, BLK 3 No 35 Hong Feng Road Suzhou 215021 Scheugenpflug Inc. 975 Cobb Place Boulevard, Suite 218 Kennesaw, Georgia 30144 Sales Partners Benelux Exmore Benelux bvba Ketelaarstraat 8 2340 Beerse ATRA S.r.l Via Roveredo 1/A Z.I. Paradiso 33170 Pordenone Ostec Enterprise Ltd. Moldavskaya str. 5/2 121467 Moscow Czech Republic / Slovakia AMTECH spol. s r. o. Palackého tˇrída 153b 621 00 Brno ETC CO.,LTD. Daehyun Techno-World. # 1206 174 Ohjeon-Dong, Uiwang-Si, Kyunggi-Do, Korea...