The Hot Spot Solution
6Pages

Metering and Dispensing Technology The Hot Spot Solution DispensingCell: The Hot Spot Solution New Plug and Produce solution for thermal management tasks Size Does Matter Enhanced material feeding unit A90 C Material Feed on a Solid Basis The new entry-level solution A220 Basic Generation Change at Scheugenpflug Erich Scheugenpflug initiates succession plan Cost-Saving and Absolutely Process Reliable A90 C with new vacuum docking function Everyone can do Simple Peak performance on less than one square meter EP-TeQ - Our New Sales Partner in Denmark Scheugenpflug systems now available in Scandinavia Feeding of Media Directly to the Dispenser New variant of the barrel agitator station available from fall 2017 Mega Trend E-Mobility Newly developed high-performance dispenser for potting batteries DispensingCell - the new entry-level solution for challenging thermal management applications The application of pastelike thermally conductive media often turns out to be a bottleneck in production. Since the used materials are primarily characterized by high viscosity and a high proportion of abrasive fillers, one has to consider an optimized system design for those applications. In order to meet the market demands for quickly available entry-level solutions for thermal management applications, Scheugenpflug developed a comprehensive solution which has been precisely tailored to this task. The new DispensingCell serves as a fully pre-configured and parameterized dispensing and potting cell. Even before delivery, it is adjusted to tested and released 1C and 2C thermally conductive materials by renowned manufacturers. Quick production launch thanks to Plug and Produce Based on the Scheugenpflug modular system, the DispensingCell is manufactured with standardized system modules. Apart from the high quality of the components, users especially benefit from the system being available on short notice. Thanks to Plug and Produce, the cell also guarantees a quick production launch. Complete package consisting of powerful single components Depending on the demands, the DispensingCell is available in three sizes. The single system components can be precisely adjusted to the requested performance, the required dispensing range and the tested potting medium. Kanban and lean production provide the basis for short delivery times and an excellent price-performance ratio. In order to enable high dispensing speed, the system is equipped with the Dos P016 TCA, a piston dispensing system optimized for highly viscous and abrasive materials. Compared to the standard Dos P model, this system can dispense up to three times faster. The material feed to the dispenser is managed by the proven cartridge expulsion unit A90 C, which is available in four variants for Semco and Euro cartridges. Let's talk about your project: +49 9445 9564 ext. 0 vertrieb.de@scheugenpflug.de

To set the tracks for the ongoing corporate success, Erich Scheugenpflug restructured the management of Scheugenpflug AG. As of April 1, 2017, Christian Ostermeier (37), previous Head of Sales and Marketing, is the new Member of the Managing Board of the company. With that, he supplements the existing Member of the Managing Board, Johann Gerneth (52). The former CEO, Erich Scheugenpflug (56), switched from the Managing Board to the Supervisory Board, where he joins three experienced representatives of the German large-scale industry as new Chairman of the Supervisory Board. From there, he...

Size Does Matter In order to facilitate the operation with the proven A90 C material feeding system, Scheugenpflug enhanced its previous model. Not only does the new A90 C excel through an improved operability, it is also shorter and lighter than its predecessor. The weight reduction amounts to a whole kilogram in the case of a 20 oz-cartridge unit. In order to allow a more facilitated filling level control, a digital display has been integrated that indicates the current filling level of the cartridge when it is almost empty (< 30 mm) by means of variously colored LEDs. The facilitated...

The requests of the tier 1 automotive customer were ambitious: They required a fully equipped dispensing and potting cell to be integrated into their production line. The available space amounted to less than one square meter only, however. Scheugenpflug devised the optimal solution. The assignment was to design a cell for the application of a highly viscous and rather abrasive 2C thermal interface material onto automotive control units. Apart from a compact layout (footprint < 1 m2), the customer strongly emphasized the need for a cycle time of 9.5 seconds. They additionally requested...

SCHEUGENPFLUG GERMANY SCHEUGENPFLUG CHINA SCHEUGENPFLUG MEXICO Lars Kongsted-Jensen, Director of EP-TeQ Our New Sales Partner in Denmark www.ep-teq.com Internationalization is a vital EP-TeQ factor for sustainable company success. For this reason, Scheugenpflug brought EPTeQ on board as a new and competent sales partner. The company, which is located in Skanderborg, Denmark, is responsible for the distribution of Scheugenpflug systems and components in Denmark, Sweden, Norway, Finland, Iceland and in the Baltic States. They will also handle service tasks and the spare parts supply –...

Preparation and Feeding of Media A new variant of the barrel agitator station will be available to customers from fall 2017 onwards. Not only does this system allow for a bubble-free preparation of self-leveling media, it is also able to directly feed the potting material to the dispenser without the need for an interconnected material preparation system. Especially for applications with a high material consumption and - compared to vacuum potting - lower demands to preparation quality, the new model represents both a cost-effective and process reliable alternative to the...