Overview

The document describes a newly developed horizontal flat-bag pulse filter designed for industrial dust extraction, emphasizing compact construction and rapid assembly. It highlights the filter's optimized top-down raw gas flow, which improves performance efficiency by preventing dust from being filtered against the flow direction.

Design and Features

• Compact Horizontal Flat-Bag Construction: The filter uses flat filter bags arranged horizontally, suitable for facilities with limited height due to side-mounted bag guidance.
• Pulse Cleaning System: Equipped with a powerful pulse jet cleaning mechanism ensuring effective dust removal.
• Optimized Gas Flow: Raw gas flows from top to bottom, enhancing filtration efficiency by aligning dust removal with the flow direction.
• Accessibility and Maintenance: Easy access to cleaning pneumatics and filter control units; side filter bag replacement enabled by filter head doors.
• Modular and Pre-Assembled Units: Delivered largely pre-assembled, reducing installation time.

Technical Specifications

The filter is available in multiple types and sizes, with key parameters summarized below:

Additional features include raw and clean gas connections on both end faces, dust collection troughs with screw conveyors starting from three units, and adjustable hopper/trough inclination angles (60° standard, optional 70°).

Advantages

• Optimized raw gas flow with top-down filtration improves efficiency.
• Horizontal filter bag arrangement allows side access in low-height installations.
• Easy maintenance of cleaning pneumatics and control units.
• Short installation times due to pre-assembled modules.
• Capacity range from 5,000 to over 150,000 m³/h suitable for industrial dust extraction.

Component Highlights

• Raw gas inlet hood with flow equalizer.
• Flat bag filter package arranged horizontally.
• Pulse cleaning pneumatics.
• Injector and filter bag with snap ring seal.
• Clean gas outlet via hood or side of clean gas chamber.
• Dust collection trough with screw conveyor and dust discharge.
• Filter control unit mounted on steel support structure.
• Filter head doors for lateral bag replacement.

Contact Information

Manufacturer: Scheuch GmbH
Address: Weierfing 68, 4971 Aurolzmünster, Austria
Phone: +43 / 7752 / 905 – 0
Fax: +43 / 7752 / 905 – 65000
Email: [email protected]
Website: www.scheuch.com