350 MBRK, 550 MBRK, 650 MBRK Checking Machine for Crankshafts • Quality control of crankshaft castings or forging and finish machined crankshafts • Manual loading and unloading • Expandable with a correction unit Range of appliation Unbalance measuring machine for passenger vehicle and commercial vehicle crankshafts of various sizes. Can be used in production for checking production quality of masscentered castings or forgings and/or of completely machined crankshafts. Transport of the shafts either manual or by corresponding lifting device. Special features Machine concept expandable through modular design. Universal belt-drive or end-driven cage, both require no adapters. Rotor support between either spindle cones or in a cage with large setting range for crankshaft castings or forgings. Design Machines with horizontal rotor axis and rugged sub-critical balancing unit. Belt-drive for the crankshaft and end-drive for the cage. Support of the crankshaft according to requirements and task, between spindle cones or in a cage. Schenck RoTec GmbH Landwehrstrasse 55 D-64293 Darmstadt Telefon (0 61 51) 32 23 11 Telefax (0 61 51) 32 23 15 http://www.schenck-rotec.de E-Mail [email protected]

350 MBRK, 550 MBRK, 650 MBRK Checking Machine for Crankshafts Crankshaft casting supported in rotating spindle cones. Suitable for symmetrical crankshafts. Equipped with belt-drive and angle reference through a single-mark on the rotor. Optional precision roller carriages for directmounting of finish-machined crankshafts. Balancing cage for all types of crankshafts. Technically correct balancing of asymmetrical crankshafts (e.g. V-shafts) through bias weights. Exact angle position determination by alignment ruler. 1 Balancing machine2 Balancing cradle3 Drive4 Switch cabinet and measuring device...

350 MBRK, 550 MBRK, 650 MBRK Checking Machine for Crankshafts Order No. R0250202.01 - R0250502.01 - - R0250902.01 - - 1 x spindle cone, short Order No. - R0250303.01 - R0250603.01 R0250703.01 - R0251003.01 R0251103.01 1 x spindle cone, long Order No. - R0250304.01 - R0250604.01 R0250704.01 - R0251004.01 R0251104.01 2) Centered crankshaft castings or forgings, symmetrical (e.g. straight-four cylinder); support between spindle cones 3) Centered crankshaft castings or forgings, symmetrical or asymmetrical (e.g. V-shafts). Support between spindle cones in cage, on request with counter moment 4) Data...