ProFlex® C
2Pages

{{requestButtons}}

Catalog excerpts

ProFlex® C - 1

ProFlex® C500 / C6000 Loss-In-Weight Feeder .. Feed System for Volumetric and Gravimetric Feeding of Powders and Granulate Materials .. Rapid and Simple Disassembly for Cleaning and Changing Feed Material .. Asymmetric Construction Allows a Space-Saving Arrangement in Pairs of up to 8 Feeder Stations .. Flexible Feeder Container with External Agitation .. Integrated Measuring, Control and Regulation Electronics Properties The ProFlex® C feed system is used for the continuous volumetric and gravimetric feeding of bulk materials such as powders and granulate materials. The ProFlex® C is specially designed to meet the requirements of the compound and masterbatch indus-tries: the components can be easily disassembled to adjust the feed rate or to be cleaned with just one tool. The asymmetric constructions of the ProFlex® C allows for a space-saving arrangement in pairs of up to 8 feed stations. The orientation of the discharge side can be changed with just a few movements to enable the greatest possible flexibility. There are two basic ProFlex® C modules and a variety of extension hoppers, screws and spirals for adaptation to the bulk material characteristics and the flow rate. Design The ProFlex® C operates using the principle of external agitation: the feeder trough, of different elastomers, is filled extraneously and thus facilitates a material flow that is gentle on the material in the container and an even filling in the feed organ. The geometry of the ProFlex® C discharge pipe creates a low-pulsation discharge at lower screw rotations and thus enlarges the utilizable adjustment range at higher feed constancy. The ProFlex® C is non-sensitive to lateral shocks or oscillations thanks to the MULTI-POINT weighing sys-tem. The straightforward transportation safety device allows the scales to be transported securely. All load or signal cables between the weighing and stationary sections of the ProFlex® C are laid in the interior of the weighing module and are not affected by shunt forces. BV-XXXXX D2322GB

Open the catalog to page 1
ProFlex® C - 2

Technical Data C500 Series C6000 Series Volumetric feed rate 1 - 500 l/hr 100 - 6000 l/hr Single spiral Single screw 19 / 25 / 35 / 44 mm 57 / 76 / 89 / 102 mm Extension hopper approx. 50 l approx. 200 / 400 l Feeder drive (three-phase motor) 0.25 kW 0.75 kW Agitation drive (three-phase motor) 0.12 kW 0.37 kW Ambient temperature -20...50°C Bulk materials temperature -30...80°C (higher temperatures on request) Bulk material density 0.3 to 0.8 kg/dm³ (higher densities on request) Grain size up to 5 mm 8-fold view Paired arrangement of two ProFlex® C devices BV-D2322GB 0917 All information is...

Open the catalog to page 2

All Schenck Process Holding GmbH catalogs and technical brochures

  1. MaxiStore®

    8 Pages

  2. MULTIRAIL®

    16 Pages

  3. CONiQ®

    12 Pages

  4. MCPP

    12 Pages

  5. ModuPlasma

    8 Pages

  6. MaxiStore®

    8 Pages

  7. SacMaster®

    8 Pages

  8. Food industry

    20 Pages

  9. TEDO Conveyors

    18 Pages

  10. RotoScrew

    2 Pages

  11. DWB

    4 Pages

  12. MultiFlex

    4 Pages

  13. LinaClass®

    6 Pages

  14. Stock Valves

    8 Pages

  15. SacMaster

    1 Pages

  16. MULTIBELT®

    1 Pages

  17. DISOCONT ®

    4 Pages

Archived catalogs

  1. MULTIDOS® L

    4 Pages

  2. MULTIGRAV®

    4 Pages

  3. MULTIDOS® E

    4 Pages

  4. MULTIDOS® M

    4 Pages