Catalogs >
Schenck Process Holding GmbH >
MULTISTREAM® G - Solid Flow Meter

MULTISTREAM® G - Solid Flow Meter
1 / 4Pages

Catalog excerpts

MULTISTREAM® G Solids Flow Meter Flow rate measurement on the deflecition chute principle Dust-tight housing Compact design Cost effective, simple integration MULTISTREAM G Solids Flow Meters are designed as enclosed in-line measuring systems for continuous acquisition of flow rates from 4 t/h to 1000 t/h (max. 1250 m³/h). These measuring systems can be used for flow rate and consumption measurement totalization and batching of pulverized to granular materials with a grain size of up to 30 mm. Equipped with a controllable prefeeder, MULTISTREAM® G is also available for use as a feed system, upon request. Thanks to its enclosed, rugged design, this measuring system is the answer to limited space and enclosed conveyor routes. The standard equipment of MULTISTREAM® G Solids Flow Meters comprises: Sheet metal housing, Guide and measuring chutes, Load cell, Measuring force transmission to load cell arranged outside of material room, Cable junction box. The load cell arranged outside of material room, measuring system can be used at material temperatures of up to 100° C. Higher temperature ranges are available, upon request. The deflection chute measuring system acquires the flow rate by using a reactive force. Via guide chute, the material is leveled out, settled, then guided to the curved measuring/ deflection chute, free from shocks. On the measuring chute the material is accelerated in radial direction. The resulting reactive force is acquired by the load cell. If higher accuracies are required, check measurements are necessary which allow the measuring system to be calibrated without interrupting material flow. Requiring presilo to be weighed, this additional equipment is available upon request.

Open the catalog to page 1

Dimensions [mm] MULTISTREAM® G Solids Flow Meter Pneumatic Conveyer, Screw, etc. Load Cell

Open the catalog to page 2

Technical Data MULTISTREAM® Solids Flow Meters G 400 Variant Flow rate ± 2% of nominal flow rate Measuring range - 2 mbar to - 8 mbar, Variation ± 2 mbar Operating pressure Weight Ambient temperature Material temperature Bulk density Grain size Flow properties min. 0,4 t/m³ max. 10 mm (single grain up to 30 mm) pulverized to granular, non-sticky Additional Requirements Order Data Stated accuracy relates to maximum (nominal) flow rate in the range of 20 -100% (measuring range 1:5) under the following conditions: Constant material properties (flow behaviour, moisture, temperature, grain size)...

Open the catalog to page 3

MULTISTREAM® G, Solids Flow Meter MULTISTREAM® G Operating and Service Manual F021140.01 F021140.02 F021140.03 German English French One set of documentation is supplied as standard. Should you need additional copies, please order separately. Remember to indicate desired language version. Schenck Process GmbH Pallaswiesenstr. 100 64293 Darmstadt, Germany sales@schenckprocess.com wwww.schenckprocess.com All information is given without obligation. All specifications are subject to change. © Copyright by Schenck Process GmbH, 2007

Open the catalog to page 4