MULTICOR® K & MULTICELL - Coal Dust Feeding
1Pages

{{requestButtons}}

Catalog excerpts

MULTICOR® K & MULTICELL - Coal Dust Feeding - 1

The pressure-proof mass flow feed system using the Coriolis principle with a horizontal star feeder - an unbeatable team Optimal Pulverized Coal Feeding Economical, high-quality, reliable pulverized coal feeding results from the interplay of overall system engineering, material discharge, feeding, and pneumatic material transport. System components that are perfectly matched to each other are a must for success. 1. Pulsation-free silo extraction At the beginning of the process chain, Schenck Process Silo Engineering stands for mass flow. The large silo outlet and the agitation system integrated into the horizontal star feeder ensure the homogenization of the material and its pulsation-free discharge from the silo. 2. Exact measurement - excellent feeding The material flow is measured quickly and precisely using the Coriolis principle, which is unaffected by outside influences. The MULTICELL horizontal star feeder's speed control performs the direct mass flow measurement. This ensures that the actual feed rate corresponds exactly to the specified nominal value. Schenck Process Engineering ensures that the pneumatic conveyor line is laid out in an ideal fashion. The required amount of air and the conveyor cross-section are calcu- lated to ensure optimal transport of the fuel from the feeder to the burner. The exact design pressure and intake volume of the blower are also determined. 0 High feeding constancy = high product quality and efficient kiln operation E3 Feeding is unaffected by outside influences 0 Engineering, material discharge, feeding and measurement from a single source 0 High-quality materials for all contact parts provide excellent wear resistance System variations depending on the plant concept: Direct discharge and direct infeed 13 Multiple feeding of the fuel from a silo to several burners (B) 0 Infeed to a common conveying line; feeding of different fuels to Feeding with intermediate hopper E Multiple feeding, but using an intermediate hopper E9 Infeed to a common conveying line, but using an intermediate H Infeed using a pump or star feeder is possible at high conveying H Manual shut-off gate at the silo discharge for trouble-free feeder E3 Automatic check measurement device for online checking and correction of feeding system parameters when needed E9 Blower, silo technology, pneumatic conveying system MULTICELL and MULTICOR K Combinations Single feeding/direct infeed Multiple feeding/direct infeed 0 0 Multiple infeed Single feeding dust pump/star feeder Multiple feeding dust pump/star feeder Shut-off gate Check measurement device Silo technology, blower, pneumatic transfer system

Open the catalog to page 1

All Schenck Process Holding GmbH catalogs and technical brochures

  1. FulFiller ®

    8 Pages

  2. MaxiStore®

    8 Pages

  3. MULTIRAIL®

    16 Pages

  4. CONiQ®

    12 Pages

  5. MCPP

    12 Pages

  6. ModuPlasma

    8 Pages

  7. MaxiStore®

    8 Pages

  8. SacMaster®

    8 Pages

  9. Food industry

    20 Pages

  10. TEDO Conveyors

    18 Pages

  11. RotoScrew

    2 Pages

  12. DWB

    4 Pages

  13. MultiFlex

    4 Pages

  14. LinaClass®

    6 Pages

  15. Stock Valves

    8 Pages

  16. SacMaster

    1 Pages

  17. MULTIBELT®

    1 Pages

  18. DISOCONT ®

    4 Pages

Archived catalogs

  1. MULTIDOS® L

    4 Pages

  2. MULTIGRAV®

    4 Pages

  3. ProFlex® C

    2 Pages

  4. MULTIDOS® E

    4 Pages

  5. MULTIDOS® M

    4 Pages