INTECONT® PLUS
1 / 4Pages

Catalog excerpts

INTECONT® PLUS for Measuring Systems % Compact weighing electronics for continuous measuring systems % Integrated display and control panel % Optimal communication structures thanks to modular fieldbus technology % EasyServe PC program for convenient commissioning and service % Enhanced operating reliability through diagnostics and self-testing functions % High operating convenience, automatic calibration programs % Optional legal-for-trade variant Application The INTECONT® PLUS weighing electronics is specially designed for weighing in continuous production processes. It is the right solution whenever material flows have to be measured and acquired with high accuracy with the use of % Belt weighers (MULTIBELT®) % Solids flow meters (MULTISTREAM®) % Coriolis mass flow meters (MULTICOR®) This also covers special applications, e.g. legal-for-trade weighing or use in the hazardous area. The INTECONT® PLUS weighing electronics is primarily designed for applications with a need for convenient and elaborate display, control and monitoring, in addition to basic measuring functions. The weighing electronics ensures repeatability and transparency of the production process. Equipment The system is supplied as front panel mounting unit or with wall-mounting housing for local installation. Operation is via ergonomically styled keyboard organised into operating and service functions. A luminescent, anti-glare two-line display ensures easy reading of results. Equipped with appropriate communication module, INTECONT® PLUS optimally fits into any automated environment. Operating Principle Although the INTECONT® PLUS functions vary with every scale type, the basic equipment is always the same. % System accuracy for weighing tasks better than 0.05% % Manual and/or automatic zero setting % Full feed/dribble feed control for accurate batching % High electromagnetic compatibility % Galvanically isolated outputs % Totalizing counter pulses % Fail-safe data memory (EEPROM) % Integrated diagnostics and self-testing functions (SPC) % Default settings for simple and quick commissioning % Auto calibration (automatic calibration programs, self-starting taring) % Calibration intervals with signal output (selectable at will) % Dialog available in German, English, Italian, Spanish and French % Status, event, calibration and quantity reports % Simulation mode for testing and learning BV-D2184GB

Open the catalog to page 1

Weighing functions As a function of mechanical system used, the actual feed rate is acquired using: % Belt load and belt speed (belt weighers) % Reactive force (solids flow meters) % Direct mass flow measurement on the Coriolis principle (mass flow meters) In addition to the comprehensive basic equipment, the following weighing functions are available: % Belt weighers - Accurate belt speed measurement - Belt influence compensation (BIC) - Belt run monitoring - Shifting of weighing to point of discharge - Legal-for-trade variant (upon request) % Solids Flow Meters - Adaption to varying...

Open the catalog to page 2

Technical Data Base Unit Display Clear text fluorescent display, 2 lines with 20 digits each, 6 mm character height Power supply 24 VDC +30% / -25% Consumption 20 VA Ambient conditions Operating temperature -40° to 60°C EMC (EN 61000, EN61326) conform to CE regulations Legal-for-trade application: Temperature range -10° to +40°C Protection Front panel mounting housing Front protected to IP 65 Measuring inputs Speed (RPM) input (NAMUR level 0.04 - 3000 Hz) Load cell input (R min 80 Ù, up to 1000 m cable) Release contact (24 V, 5 mA) Namur input for belt circuit sensor Control inputs 3...

Open the catalog to page 3

INTECONT Variant VEG 206XY X = 0 : No I/0 expansion = 1 : With I/0 expansion Y = 0 : No communication module Y = 1 : Communication module Modbus, 3964 R Y = 2 : Communication module Profibus DP Y = 3 : Communication module Device Net Y = 4 : Communication module Ethernet MODBUS/TCP Options Wall housing with power supply for belt weighers and solids flow meters Wall housing with power supply, control unit and power switch, for Coriolis mass flow meters Power supply: desk-top, panel-mounting units Analog display Pulse counter, non-resettable Pulse counter, resettable Event printer BV-D2184GB...

Open the catalog to page 4