INTECONT® Opus
4Pages

Catalog excerpts

INTECONT® Opus, measuring system for legal-for-trade belt weighers .. Compact weighing electronics for legal-for-trade belt weighers .. OIML 0,5 / 1 / 2 .. Exchange of components without recalibration (VKG) .. Integrated display and control panel .. High operating convenience, automatic calibration programs .. Fieldbus-Interfaces .. 2 Housing variants: VEG, VKG Application The INTECONT® Opus is a measuring device especially for legal-for-trade belt weighers. Equipment The system is supplied as front-of-panel mounting unit or with stainless steel box for local installation. Operation is via ergonomically styled keyboard organized by operating and service functions. A luminescent, anti-glare two-line display ensures easy reading of results. A Fieldbus connection can be realized by optional PROFIBUS DP-V0, DeviceNet or Ethernet modules. For legal-for-trade registrations an external l.f.t. memory (VEG) or internal l.f.t. memory (VKG) is available. Function .. According to OIML R50 requirements .. Manual and/or automatic zero setting .. Full feed/dribble feed control for accurate batching .. Permanent storage of parameters .. Storage of calibration parameters in the load cell dongle. No recalibration after exchange of components .. Factory presettings for simple and quick commissioning .. Auto calibration (automatic calibration programs) selfstarting taring .. Calibration intervals with output signal .. Pulse counter (value and pulse width set by parameter) .. Status, event, calibration and quantity reports .. Simulation mode for test and learning BV-D2267GB

Open the catalog to page 1

Weighing Functions Depending on mechanical system used, current flow rate is based on belt load and belt speed. In addition to the comprehensive basic equipment, the following weighing functions are available: - Accurate belt speed measurement - Shifting of weighing to point of discharge - Batching function Equipment supplied Designation Type Material number Basic Devices VEG Front-of-panel unit VEG 20620 V060122.B01 Front-of-panel unit with Modbus VEG 20621 V060123.B01 Front-of-panel unit with Profibus VEG 20622 V060124.B01 Front-of-panel unit with DeviceNet VEG 20623 V060125.B01...

Open the catalog to page 2

INTECONT® Opus for installation into a control panel VEG 2062x Display Fluorescent display, 2 lines with 20 digits, digit height 6 mm Keyboard 24 keys Supply voltage 24 VDC +50% / -25%, max. 20 VA Temperature range Operating temperature: -40°C to +60°C Storage temperature: -40°C to +80°C Legal-for-trade operating temperature: -10°C to +40°C Load cell input Power supply: 6V AC Load cell impedance: Rmin 80 Ù Cable length: max. 1000m Housing Panel mount, front IP65 Binary inputs 5 x Optocoupler 18-36 VDC, typ. 5 mA 2 x NAMUR, 0,04 - 2500 Hz (DIN 19234) Binary outputs 8 x Relais, max. 230 V 8 A...

Open the catalog to page 3

INTECONT® Opus in the Stainless steel housing VKG 2076x Display LCD 1 line 20 digits, digit height 12mm, back-lit Keyboard 24 keys Supply voltage 85-250 VAC, 50-60Hz, max. 10 VA Temperature range Operating temperature: -30°C to +60°C Storage temperature: -40°C to +80°C Legal-for-trade operating temperature: -20°C to +40°C Load cell input Power supply: 5V AC Load cell impedance: Rmin 47 Ù Cable length: max. 1000m Housing Stainless steel 1.4301, IP 65 Binary inputs 4x Optocoupler, 18 - 36 VDC, typ. 5 mA 1 x NAMUR, max. 5V, 0,04-3000Hz Binary outputs 4 x Relais, 230 VAC, 60W max. Pulse output...

Open the catalog to page 4