DISOMAT® Satus
4Pages

{{requestButtons}}

Catalog excerpts

DISOMAT® Satus - 1

DISOMAT® Satus Weighing Transmitter % Digital Weighing Transmitter % Level Control % Single-Component Feed Control System % System-Compatible with Fieldbus, Serial Interface, Analog Output and Binary Inputs and Outputs % Ethernet Connection % Comfortable commissioning with the DISOPLAN Program % Four 230 V Relay Outputs % Three Binary Inputs % Optional Weight Display Model Designed for Connecting Scales in Hazardous Areas Application The DISOMAT® Satus weighing transmitter is a reasonably priced solution for many basic weighing tasks. Its fieldbus, serial interface and analog output make it suitable for scales not operated on-site which are connected to higher-order electronic data processing and PLC systems. The optional display also allows on-site monitoring of weight values. Typical Applications for the DISOMAT® Satus are: - Weight sensor for weight control and bin level measurement. Serial or analog transmission of data to an electronic data processing or PLC system - Monitoring of containers' fill levels, indicating MIN and MAX values via parallel contacts - Single-component feed process (GIW or LIW operation). Design The VSE 20900 basic board comprises the following functions: % Measuring circuit with A/D conversion % 4 relay outputs safety separated % 3 binary inputs, galvanically free % 1 analog output % 3 serial interfaces % Ethernet connection (10/100Mbaud) % Extension connector for fieldbus module (Profibus / DeviceNet / Ethernet IP) The following functions can be executed using expansion cards: • PROFIBUS coupling • DeviceNet coupling • Display, 3 1/2 digits, 10 mm digit height, for weight monitoring. • 3 push-buttons for controlling scales functions The basic board is slotted into a 19" sub-rack as a plug-in board. The device is powered either by 24 VDC or by optional 115 / 230 VAC power supply modules. Weighing sensors and display devices in category 2G (zone 1) are connected using the optional barrier sets. The barrier sets are inserted directly into the 19" slots. Alternatively, the DISOMAT® Satus may come fitted in a field housing. This version also comes with the option of 24V power supply and integrated power supply unit. The field housing comes in designs suitable for direct on-site assembly in potentially hazardous areas of the category 2D / 3G. BV-D2256 GB

Open the catalog to page 1
DISOMAT® Satus - 2

Communication With up to three serial interfaces, the DISOMAT® Satus is fully equipped to exchange data with its environment. For example, - Configuration - Serial display - Data Processing may be connected in parallel. Two of the interfaces are RS-232 interfaces. The third (RS-485, 2/4-wired) is specially suited to communication within the bus and over longer distances. In control systems the Ethernet connector (10/100 MBaud) is operated using the MODBUS/TCP protocol. Alternatively, HTML pages stored in the device may be called up using a standard web browser. The device can also be...

Open the catalog to page 2
DISOMAT® Satus - 3

Casing 19" VNG 0900 Sub-Rack (Fig.1) Suitable for control cubicles which are accessible from the rear or which have a pivoting frame. The VNG 0900 has room for 10 main cards. Each of the following require one slot: - VSE 20900 DISOMAT® Satus circuit board - VXB 20900/20910 Explosion protective circuit - VNT 209xx power supply unit for 115/230 VAC - blank front panel - The weighing transmitter model with display requires two slots The optional bus cards require no additional slots. Protection class at the frontside: IP 20 Approx. weight (fitted): 10 kg VFG Field Housing (Fig.2) A VSE 20900...

Open the catalog to page 3
DISOMAT® Satus - 4

Technical Data: The supply voltage for 19“ VFE 20900 unit 18-36 VDC The supply voltage for VFG 20900 / 20910 field unit 18-36 VDC / 115/230 VAC Power consumption Max. 10 VA Temperature range Service temperature: -30 to +60°C Storage temperature: -40 to +80 °C Measuring channels 1 Load cell supply 5 V alternating voltage supply Input signal 0 to 15 mV Sensitivity 0.7 ìV/d Accuracy Linearity error: < 0,05 ‰ Zero setting stability, TK0: < 1,0 ìV / 10k corresponds: < 0,07 ‰ / 10k related to max. Input signal Zero setting stability TKc: < 0,1 ‰ / 10k Compound error, Fcomb: < 0,2 ‰ / 10k unit kg,...

Open the catalog to page 4

All Schenck Process Holding GmbH catalogs and technical brochures

  1. FulFiller ®

    8 Pages

  2. MaxiStore®

    8 Pages

  3. MULTIRAIL®

    16 Pages

  4. CONiQ®

    12 Pages

  5. MCPP

    12 Pages

  6. ModuPlasma

    8 Pages

  7. MaxiStore®

    8 Pages

  8. SacMaster®

    8 Pages

  9. Food industry

    20 Pages

  10. TEDO Conveyors

    18 Pages

  11. RotoScrew

    2 Pages

  12. DWB

    4 Pages

  13. MultiFlex

    4 Pages

  14. LinaClass®

    6 Pages

  15. Stock Valves

    8 Pages

  16. SacMaster

    1 Pages

  17. MULTIBELT®

    1 Pages

  18. DISOCONT ®

    4 Pages

Archived catalogs

  1. MULTIDOS® L

    4 Pages

  2. MULTIGRAV®

    4 Pages

  3. ProFlex® C

    2 Pages

  4. MULTIDOS® E

    4 Pages

  5. MULTIDOS® M

    4 Pages