Cut-to-size saw fh 6 / fh 8
20Pages

Cut-to-size saw fh 6 / fh 8 On the cutting edge.

Energy-efficient production With the fh 6 / fh 8, environmental protection and energy saving are already part of the standard programme: examples of this are the integrated standby operation, the optimised extraction of the units, a greatly reduced consumption of compressed air or, for example, the energy-efficient drive technology.

With the fh 6 / fh 8 IMA Schelling extends the familiar strengths Today the fh 6 / fh 8 already satisfies the standards of tomorrow. For instance, this is clearly demonstrated in the fact that it already anticipates future noise protection and dust protection standards. Special small grooves in the machine table minimize noise and dust emissions. Sound-attenuated single blowers in the air cushion tables, as well as special insulated cladding offer additional noise reduction. Thus today the fh 6 / fh 8 is the quietest machine in its class, by a wide margin.

Contour-turned polyamide freewheeling rollers ensure gentle material transport Clamps ensure the exact positioning of the material on the cutting line Finely machined steel surface prevents wear and tear and protects the material surfaces

Evolution drive concept with fixed motor and integrated chip guidance system Before and after the sawing line for highest angular accuracy Individually lockable for optimal work

HIG HE S T PRECISION OVER THE ENTIRE SERVICE LIFE

Robust. Productive. Precise. With the fh 6 / fh 8 cut-to-size saw, IMA Schelling offers maximum productivity and precision for highly professional machining of wood fibreboard and particle board panels: for flexible and fast cut-to-size of single panels as well as large books of material. With this, IMA Schelling remains true to the philosophy of solid mechanical engineering. The massive, robust construction prevents natural vibration, and thus increases precision at each cut. In addition this solid construction assure years of reliable implementation, as well as unusually long tool service...

With the fh 6 / fh 8 a variety of automatically monitored functions ensures optimized, harmonious work sequences. Saw feed and saw blade stroke are executed simultaneously, this means shorter cycle times per cut. The saw feed rate adjusts itself to the different book heights. This ensures that the machine always works at the maximum possible feed rate. The pressure beam is regulated automatically depending on panel length and book height. The IMA Schelling fh 6 / fh 8 cut-to-size saw has the unique ”Evolution“ drive concept and offers an optimally matched ratio of motor power and useable...

AIR FLOATATION TABLE The extra-wide, movable air floatation tables enable optimal working and can be locked in any desired position. At the same time, it serves as a material buffer during the entire cutting process. No removal and reloading of parts in the saw necessary Protection of the panel surfaces Also optionally available as a turntable The air floatation table is always where it is needed at the moment Even high books can be easily aligned to ensure the highest angular accuracy System comparison: line contact - no point load The dual strip aligners, one before and one after the saw...

IMA Schelling offers individual feeding, material handling and stacking variants that can be adapted to customer-specific requirements. Everything from a single source. From planning to commissioning. AUTOMATIC IN-FEED With automatic in-feed the lift table adjusts itself precisely to the set number of panels to be divided (for panel thicknesses from 6 mm). The push-off rods move the book of material from the lift table onto the roller table. Special push-off spindles are used to handle panels from a thickness of 3 mm as well as wavy material. With special counterholders, even thin sheets...

Easy and comfortable handling allows a significant reduction of time, protects the material and relieves the operating personnel. The turning device has been developed for automatic loading cut-to-size machines and angular systems TURNI NG D E V I CE Makes automatic execution of head cuts and longitudinal cuts possible without interruption or manual interference Each of these turns is executed in 90 degree steps. In this process the speed is automatically adapted to the actual material book height HA ND STACK I NG For series production with many book cuts, it is advisable to connect to a...

Furthermore, IMA Schelling offers optional, individual and customised features that contribute to a significant increase in performance. AU TO M AT IC L AB E L I N G In this process, labels are applied to the entire board fully automatically in the infeed area The labeling positions can be selected freely For parts rotated by 90 degrees, the label is also offset by a quarter turn. The labels are applied parallel to the cutting of the preceding cutting plan Previous stops for manual labeling are eliminated, and production speed increases Two individually operating feeders that position the...

High Performance Optimization High Performance Optimization High Performance Optimization High Performance Optimization High Performance Optimization Industry programs Automatic panel storage system High Performance Optimization Panel remainder management XBoB XBoB XBoB Remainder Board Administration Remainder Board Administration Remainder Board Administration Machining centre Edge banding machine

CO NTROL DE SK: E ASE O F OP E RATI O N ! IMA Schelling‘s easy-to-operate ”MCS Evolution“ control software and ”HPO“ optimization software make operating the saw a breeze. Sequences are represented in real-time mode with unsurpassed fault diagnostic. Self explanatory operator guidance particularly eliminate operating errors, therefore increasing availability and machine efficiency. Operator panel: Electronic scorer adjustment Control: Data of actual production on the screen With the XBoB remainder management program, panel remainders can be managed in a manual store. Remainders are booked...