- Catalogs
- Schalttechnik Janus Austerlitz s.r.o.
- Changeover Reed Switch JRC-10 / ORC-10
Changeover Reed Switch JRC-10 / ORC-10
Changeover Reed Switch JRC-10 / ORC-10
The document provides detailed technical specifications for a changeover reed switch, specifically the JRC-10 / ORC-10 Form C Switch. Key parameters include a maximum contact rating of 10 W/VA, maximum switching voltage of 100 VDC/VAC, and a maximum switching current of 0.5 A. The switch operates within a standard pull-in range of 10-55 AT and has a release range of 8 AT. It features a maximum switching frequency of 250 Hz and typical operating and release times of 2 ms and 0.02 ms, respectively.
Environmental Conditions
The switch is designed to operate in temperatures ranging from -40°C to +150°C. It can withstand vibrations up to 30 g (50-2000 Hz) and shocks up to 50 g during a half sine wave of 11 ms.
Design and Materials
The switch is noted for its excellent reliability and life expectancy. It features original JanusReedContact technology, with contact material made of Rhodium (Rh), and is filled with inert gas. The leads are gold-plated, and the switch can be actuated by a permanent magnet or electromagnet. It offers tight hysteresis and an AT range from 10 to 55.
Applications
The switch is suitable for use in measurement systems, proximity sensors, position detection, and fluid level sensing.
Handling and Modification
Care must be taken during handling and modification to avoid damage to the hermetic seal. The recommended distance for lead bending and cutting is no less than 1.2 mm from the end of the glass capsule. Customization options are available based on customer specifications.
Ordering Information
The packaging factor is 200 pieces per order, with AT ranges and modifications available based on customer drawings.
Catalog excerpts
Standard pull in range (p.i.) Environmental conditions^^^^^^^^^^^^^^^^^H All data are for unmodified reed switches measured using standard test coil with 10 000 turns, wire diameter 0.06mm and coil resistance 1600 Q. Dimensions (mm) SCHALTTECHNIK Changeover Reed Switch JRC-10 / ORC-10 Form C Switch Excellent reliability and life expectancy • Original JanusReedContact • Contact material Rh • 10W, 0,5A changeover switch • Filled with inert gas • Gold-plated leads • Actuation by permanent magnet or electromagnet • Tight hysteresis possible • AT range from 10 to 55 possible Application: • Measurement systems • Proximity sensors • Position detection • Fluid level sensing, etc. Handling and modification: Reed switch must be protected while handling, cutting, bending, mounting, encapsulating, welding, soldering etc.. During modification, care must be taken not to apply excessive mechanical force that could result in hermetic seal damage. Recommended distance from end of glass capsule for lead bending and cutting is no less than 1,2mm. We can offer crop and form customisation to your specification. Ordering: Packaging factor = 200pcs AT ranges and modification on your choice and based on your drawings.
Open the catalog to page 1
