Snap-action switches S826
8Pages

{{requestButtons}}

Catalog excerpts

Snap-action switches S826 - 1

Connect - Contact - Control Snap-action switches S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en more information here: schaltbau-gmbh.com

Open the catalog to page 1
Snap-action switches S826 - 2

Snap-action switches S826 Series Dual changeover switches with positive opening operation and wiping, double-break contacts Schaltbau S826/S926 series dual changeover switches feature positive opening operation which guarantees the forced disconnection of contacts even when they have become welded together due to a short-circuit. The contact bridges of the snap-action switches are galvanically isolated allowing two separate load circuits with independent voltage levels to be controlled simultaneously. Wiping, double-break contacts ensure high reliability even at low electrical loads....

Open the catalog to page 2
Snap-action switches S826 - 3

Example:   S826 b10/20/40 L    Special design, optional Magnetic blowout L Series, contact configuration  S826 Dual changeover switch, wiping double-break contacts, positive opening operation, galvanically isolated contact bridges S926 Same as S826 with improved resistance to chemicals, impact and extremes of temperature Actuator styles  Actuator b c cs Push button Push button Push button Roller lever Roller lever Roller lever Roller lever Mounting no mounting plates mounting plates mounting plates, slotted no mounting plates mounting plates mounting plates, slotted mounting plates, one...

Open the catalog to page 3
Snap-action switches S826 - 4

Series S826/S926 Series Contact configuration Conventional thermal current Ith Rated insulation voltage Ui Pollution degree Rated impulse withstand voltage Uimp Overvoltage category Form Zb SPDT-DB, 2 galvanically isolated contact bridges, 4 terminals Utilization category for silver contacts *2 Contact resistance, typ. without leads connected Positive opening force *4 Actuator travel for positive opening operation Maximum actuator travel *4 Vibration resistance, 10 … 500 Hz all directions (without aux. actuator at 0.1 ms max. opening time) Shock resistance (without aux. actuator at 0.1 ms...

Open the catalog to page 4
Snap-action switches S826 - 5

Dimension diagram, circuit diagram ●● Dimension diagram S826 b / S926 b  SPDT-DB, Form Zb Front mount (M3) Torque 0.9 Nm max. Side mount / ganging Torque 1.0 Nm max. Dual changeover switch, double-break contacts, positive opening operation, 2 galvanically isolated contact bridges and wiping contacts S826  b / S926  b Push button (standard) Circuit diagram 50 Magnetic blowout (optional) for increased DC breaking capacity Free position Screwable thread length of fastening screw Actuator styles, actuator positions ●● S826 / S926, Push button(standard)  b / c / cs Actuator position Free...

Open the catalog to page 5
Snap-action switches S826 - 6

Mounting Front mount, Ganging Series S826/S926 ●● Push button and mounting brackets style c Front mount ●● No mounting brackets (standard):Fastening by way of the retainer nuts (M3) which are fixed in the housing of the switch. Tightening torque 0.9 Nm max. ●● With mounting brackets:Mounting brackets are available for all actuator options. Tightening torque 0.9 Nm max. ●● Push button (standard) no mounting brackets style b Front mount Ganging (side mount) ●● Push button and mounting brackets, slotted style cs * Max. screwable thread length of fastening screw 1 Ganging(side mount) ●●...

Open the catalog to page 6
Snap-action switches S826 - 7

Mounting Use of roller levers Snap-action switches are designed for actuation with and without a roller lever. A roller lever is required if the direction of actuation deviates more than ±15° from the plunger axis. ●● Switch with roller lever actuated by linear cam Total travel pos. + 0.2 ... 0.3 ●● Switch with roller lever actuated by cam disc Mounting and safety instructions, environmental conditions Mounting instructions: ●● Snap-action switches should be mounted by qualified professional staff only. ●● Observe the required clearance and creepage distances. This is also applicable for...

Open the catalog to page 7
Snap-action switches S826 - 8

Schaltbau GmbH with compliments: For detailed information on our products and services visit our website – or give us a call! Schaltbau GmbH Hollerithstrasse 5 81829 Munich Germany Schaltbau GmbH manufactures in compliance with RoHS. The production facilities of Schaltbau GmbH have been IRIS certified since 2008. Certified to DIN EN ISO 14001 since 2002. For the most recent certificate visit our website. Certified to DIN EN ISO 9001 since 1994. For the most recent certificate visit our website. Electrical Components and Systems for Railway Engineering and Industrial Applications Connectors...

Open the catalog to page 8

All Schaltbau GmbH catalogs and technical brochures

  1. Flyer C320

    8 Pages

  2. UIC-IT Series

    12 Pages

  3. Brochure

    8 Pages

  4. Connectors

    7 Pages

  5. LV Series

    12 Pages

  6. SB Series

    8 Pages

  7. GA Series

    10 Pages

  8. G, GM series

    44 Pages

  9. Brochure en

    6 Pages

  10. S880 Series

    12 Pages