*mydirectindustry

Catalogs
Schaltbau GmbH
SH-1P, SH2P, SH-3P Series

SH-1P, SH2P, SH-3P Series

Product catalog summary

Overview: This document is a technical catalogue for the SH-1P, SH2P, and SH-3P series of fuse holders designed for stripe fuses compliant with DIN 43560 standards. These components are intended for use in battery-powered vehicles with voltages up to 80 V and fuse ratings ranging from 50 A to 425 A.

Specifications:

Fuse holders are available in 1, 2, or 3 pole configurations.
Designed to operate in ambient temperatures up to 70°C.
Constructed with nickel-plated brass hexagonal screws, bolts, and washers.
Copper sheet tie bars are available for 2 and 3 pole configurations.

Product Details:

SH-1P: 1-pole fuse holder, weight approx. 150 g.
SH-2P: 2-pole fuse holder, weight approx. 300 g.
SH-3P: 3-pole fuse holder, weight approx. 450 g.
VS-SH-2P-32.5-4: 2-pole tie bar, weight approx. 30 g.
VS-C165-32.5: 2-pole tie bar, weight approx. 25 g.
VS-SH-3P-65-3: 3-pole tie bar, weight approx. 40 g.

Installation Instructions:

The lower hexagonal nut should be tightened to 4 Nm, while all other nuts should be tightened to a maximum of 16 Nm.

Additional Information: The document notes that technical alterations may occur without prior notice and advises checking the company's website for updated product information.

Contact Information: Schaltbau GmbH, Hollerithstrasse 5, 81829 Munich, Germany. Phone: +49 89 9 30 05-0, Fax: +49 89 9 30 05-350, Email: [email protected], Website: www.schaltbau.com

Catalog excerpts

Connect Contact Control Contactors SH-1P, SH2P, SH-3P Series Fuse based for stripe fuses to DIN 43560 Catalogue B101.en

Open the catalog to page 1

Fuse holders for stripe fuses to DIN 43560 are designed for use in battery powered vehicles covering voltages up to 80 V. Fuse ratings may range from 50 A to 425 A. We offer fuse holders admitting 1, 2 or 3 stripe fuses. Tie bars for 2 or 3 poles are available. The fuse holders are designed for a wide range of ambient temperatures up to 70° C max. Hexagonal screws, bolts and washers are made from nickel-plated brass. Copper sheet tie bars are available for our 2 and 3 pole fuse holders. Fuse holder: The lower hexagonal nut was tightened by 4 Nm. All other nuts to be tightened by 16 Nm max. Schaltbau...

Open the catalog to page 2

All Schaltbau GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list