Group: Schaltbau GmbH
Catalog excerpts
1 More information here: schaltbau-gmbh.com Connnectors GA Series Circular connectors to industry standard Catalogue A25.en
Open the catalog to page 1Industrial connectors, GA Series Series GA industrial connectors are high-quality special purpose con-nectors. The 15 pole circular connector has a housing made of high strength aluminium magnesium alloy. The contact arrangement is a combination of 4 power contacts and 11 control contacts. Sealed to IP67/IP69K: The pin contacts and solder cups are moulded watertight in the contact inserts of the receptacles, so that there is no ingress of water even when the connector is unplugged. The thermoset contact inserts allow the connector to be used for a wide temperature range. Cable-connecting...
Open the catalog to page 2Contact arrangement Contact identification marked on Insert: Pin insert: Socket insert: 25 V / 60 V Orientation / keys and keyways Rated voltage(IEC 60038) at pollution degree 3 (IEC 60512) Current rating of individual contact, max. see page 7 Contact size / type Ø 4 mm / Crimp contact, Type C Ø 1.58 mm / Crimp contact, Type A PE contact Contact size / type Max. rated current of individual contact Wire gauge 0.50 mm² 0.75 mm² ... 1.00 mm² 1.50 mm² 2.50 mm² 4.00 mm² 6.00 mm² PE contact Wire gauge (tmin[°C]/tmax[°C]/ttesting time[days]) Mechanical endurance...
Open the catalog to page 3Connect Contact Control Our GA Series connectors have a modular structure. All components of the connector are shown in the Overview on page 2. You will find the ordering code for a connector variant as presented in this catalogue in the table opposite its dimension diagram. • Ordering code for »plug and receptacle shells« Example: GA KD 1PL Pg21 Series GA Designation of series Shell style (with contact insert 3+PE+11) ST Plug (standard) DF Flange mount receptacle Contact type P Pin contact (receptacle) S Socket contact (plug) Terminal type L Solder, pin contacts...
Open the catalog to page 4Dimension diagram Series GA Shell style KD cable receptacle Contact arr. / contacts / terminal type 1PL Threaded connection Pg21 Pg29 M25 M40 Accessory: Protection cap GA VD ●● The solder-type pin contacts are moulded in the insert of the receptacle shell. ●● Cable glands are not included in the delivery. GA DF 1PL Flange mount receptacle Dimension diagram Series GA Shell style DF Flange mount receptacle Contact arrangement / contacts / terminal type 1PL Accessory: Protection cap GA VD Note: ●● The solder-type pin contacts are moulded in the insert of the...
Open the catalog to page 5Series GA Shell style ST Plug, standard Contact arr. / contacts / terminal type 1SC Threaded connection Pg21 Pg29 M25 M40 ●● The plug shell comes with the following crimp contacts added as loose parts: ●● Socket contacts: 4x BCC-6,00-Ag, 11x BAC-1,00-Ag, ●● Reducing bushings: 4x RH-6,0/4,0, 4x RH-6,0/1,5 ●● Cable glands are not included in the delivery. Accessory: Protection cap GA VK Series GA Shell style SC Plug, short Contact arr. / contacts / terminal type 1SC Threaded connection Pg21 M25 Ordering code Accessory: Protection cap GA VK Note: ●● The plug shell...
Open the catalog to page 6Connect Contact Control /j\ Note: • According to VDE 0298-4 the wire gauge of the conductor should be determined in this way that within the limits of its specified current carrying capacity there will be no heating of the conductor exceeding the permissible operating temperature at any place or any time. • The derating diagram shows the permissible operating range.. • Control and test procedures according to IEC 60512-3, test 5b. Contacts Plugs: Crimp contacts, Receptacles: Solder contacts • Plugs ST / SC / SF Crimp type socket contacts Specifications Tools Extraction tools AWZ-A and...
Open the catalog to page 7Assembly and installation dimensions ●● Cable receptacle Cable receptacle plug, standard, plug, short 147.2 (when mated: Cable receptacle<> Plug, short) 162 (when mated: Cable receptacle<> Plug, standard) flange plug 119 (when mated: Cable receptacle<> Flange plug) ●● Flange mount receptacle Flange mount receptacle plug, standard, plug, short Plug, standard Plug, short Mounting holes Flange mount receptacle GA DF 1PL, Flange plug GA SF 1SC ●● for flange mount receptacle GA DF 1PL Earthing terminal Note: Flange mount receptacle (GA DF 1PL) and flange plug (GA SF 1SC) are to be...
Open the catalog to page 8Connect Contact Control Notes GA series Reduced scale diagrams / dimensions in mm
Open the catalog to page 9Schaltbau GmbH with compliments: For detailed information on our products and services visit our website – or give us a call! Schaltbau GmbH Hollerithstrasse 5 81829 Munich Germany Schaltbau GmbH manufactures in compliance with RoHS. The production facilities of Schaltbau GmbH have been IRIS certified since 2008. Certified to DIN EN ISO 14001 since 2002. For the most recent certificate visit our website. Certified to DIN EN ISO 9001 since 1994. For the most recent certificate visit our website. Electrical Components and Systems for Railway Engineering and Industrial Applications Connectors...
Open the catalog to page 10All Schaltbau GmbH catalogs and technical brochures
-
Catalogue CP Series
16 Pages
-
Flyer C320
8 Pages
-
UIC-IT Series
12 Pages
-
Brochure
8 Pages
-
Enabling switches S834
6 Pages
-
Connectors
7 Pages
-
Electrics for Rolling Stock
16 Pages
-
EKS127 Series
4 Pages
-
SH-1P, SH2P, SH-3P Series
2 Pages
-
LV Series
12 Pages
-
Series NF07, NF10
40 Pages
-
SB Series
8 Pages
-
G, GM series
44 Pages
-
Snap-action switches S880
12 Pages
-
Snap-action switches S847
8 Pages
-
Brochure en
6 Pages
-
S880 Series
12 Pages
-
Terminal bolts EKS 127
4 Pages
-
Overview Connectors
12 Pages
-
Manual, Connectors to UIC 558
26 Pages
-
Connectors to UIC 558
12 Pages
-
DC contactors 4 pole
6 Pages
-
DC NO contactors
6 Pages
-
Enabling switches, S834
6 Pages
-
Snap-action switches, S840
8 Pages
-
Snap-action switches, S847
8 Pages
-
Snap-action switches S826
8 Pages
-
Snap-action switches, S926
12 Pages