Website:
Schaltbau GmbH
Group: Schaltbau GmbH
Catalog excerpts
Connect Contact Control Snap-action switches S834 Series Enabling switches with positive opening operation and wiping contacts Catalogue D34.en
Open the catalog to page 1
S834 Enabling switch with positive opening operation and wiping contacts Enabling switches for manual control units of industrial robots The S834 enabling switch is typically used in manual control actuators for automatic handling machines and robotics. When installed in such devices, the S834 greatly increases safety for the operator in the working area. Operation: ●● Mid position (ON) – circuit closed: The manual control actuator is continuously held by the operator in the detented mid position. ●● Emergency cutout – the machine stops: The manual control actuator is either released or...
Open the catalog to page 2
Actuator position No te: To ensure proper operation of the positive opening function it is necessary to depress the plunger to the total travel position. However, it must not be pushed beyond total travel position. Data is valid for new switches. Actuator position Note: To ensure proper operation of the positive opening function it is necessary to depress the plunger to the total travel position. However, it must not be pushed beyond total travel position. Data is valid for new switches. Operation of enabling switches Contact is made only in position 2, the detented mid position. In...
Open the catalog to page 3
Assembly PCB assembly instructions Our S834 is designed for PCB assembly only. After assembly a test is required in accordance with the test principles of GS-ET-22, section 6. Download at: www.schaltbau.info/s834-en Hand soldering: ●● Soldering apparatus: hand-held soldering iron ●● Solder: flux-filled solder wire, lead-free ●● Temperature/duration: 350 °C; 6 sec max. (PCB, 1.6 mm, through-hole plating) Selective soldering: ●● Soldering apparatus: selective soldering station ●● Solder: lead-free solder for selective and wave soldering ●● Temperature/duration: 300 °C, 2 sec, 3 mm wave...
Open the catalog to page 4
Connect Contact Control and at room temperature, unless otherwise mentioned. Subject to technical alterations
Open the catalog to page 5
Schaltbau GmbH with compliments: For detailed information on our products and services visit our website – or give us a call! Schaltbau GmbH Hollerithstrasse 5 81829 Munich Germany Phone +49 89 9 30 05-0 Fax +49 89 9 30 05-350 Internet www.schaltbau-gmbh.com e-Mail contact@schaltbau.de The production facilities of Schaltbau GmbH have been IRIS certified since 2008. Schaltbau GmbH manufactures in compliance with RoHS. Certified to DIN EN ISO 14001 since 2002. For the most recent certificate visit our website. Certified to DIN EN ISO 9001 since 1994. For the most recent certificate visit our...
Open the catalog to page 6All Schaltbau GmbH catalogs and technical brochures
-
Catalogue CP Series16 Pages
-
Flyer C3208 Pages
-
UIC-IT Series12 Pages
-
Brochure8 Pages
-
Connectors7 Pages
-
Electrics for Rolling Stock16 Pages
-
EKS127 Series4 Pages
-
SH-1P, SH2P, SH-3P Series2 Pages
-
LV Series12 Pages
-
Series NF07, NF1040 Pages
-
SB Series8 Pages
-
GA Series10 Pages
-
G, GM series44 Pages
-
Snap-action switches S88012 Pages
-
Snap-action switches S8478 Pages
-
Brochure en6 Pages
-
S880 Series12 Pages
-
Terminal bolts EKS 1274 Pages
-
Overview Connectors12 Pages
-
Manual, Connectors to UIC 55826 Pages
-
Connectors to UIC 55812 Pages
-
DC contactors 4 pole6 Pages
-
DC NO contactors6 Pages
-
Enabling switches, S8346 Pages
-
Snap-action switches, S8408 Pages
-
Snap-action switches, S8478 Pages
-
Snap-action switches S8268 Pages
-
Snap-action switches, S92612 Pages
