INA Metal-Polymer Composite Plain Bearings Durable - low-friction - economical SCHAEFFLER GROUP

Product Range Metal-polymer composite plain bearings - Bearing type EGBZ Bush, inch Sliding laver material E60 Film type bearing Backing material No designation Steel backing plain bearings enable economical solu- tions in many industrial and automotive applications. They are particularly effec- tive with oscillating movements and achieve a rating life several times higher than that of bearings with conventional materials. In addition, all our new plain bearings are lead-free and, therefore, environmentally friendly. Different innovative materials ensure unprecedented variety. A selection of...

Material Characteristics The right material combination for every application E40 is the Schaeffler Group's new lead- free sliding material for maintenance-free metal-polymer composite plain bearings. There is no lubrication requirement over the entire operating life. The sliding layer is based on polytetrafluoroethylene (PTFE) with embedded inert additives. The triple layer material comprises the steel backing, the sliding layer and the running-in layer (see graphic). The steel backing has a sintered porous tin-bronze sliding layer with pores that are filled with the dry lubricant of the running-in...

Technical Data Benchmark results prove high performance economical alternative for applications with minimum available space and a comparatively high sliding speed. • Load carrying capacity: • Can be used in fluid applications • Relatively high sliding speeds • High moisture resistance - can also be used in water nance versions • Steel and bronze backings Comparison of the technical parameters of materials E40 and E50 Proven low-wear sliding characteristics: The benchmark results The special characteristics of INA metal-polymer composite plain bearings are due to the combination of plastic and...

The world of metal-polymer composite plain bearings • Construction machinery - e. g. joints of truck cranes, supporting joints of cable laying plows, arms of excavators • Agricultural machinery - e. g. tie rods of tractor axles, steering pin bearings of automatic harvesting machinery, loading bodies of forestry vehicles • Fluid technology - e.g. hydraulic and pneumatic cylinders, gear pumps and butterfly valves • Commercial vehicles - e.g. kingpin bearings, pivot joint bearing supports of the driver's cabs on heavy vehicles, heavy vehicle bodies • Sports equipment - e.g. bottom brackets of exercise...

Schaeffler Technologies Internet www.ina.com E-Mail [email protected] From other countries: Every care has been taken to ensure the correctness of the information contained in this publication but no liability can be accepted for any errors or omissions. We reserve the right to make technical © Schaeffler Technologies GmbH & Co. KG This publication or parts thereof may not be reproduced without our permission.