Catalogs >
Schaeffler Technologies AG & Co. KG >
High Speed, High Load Capacity

High Speed, High Load Capacity
8Pages

Catalog excerpts

High Speed, High Load Capacity: Bearings for Screw Drives BSB..-SU-XL Single row axial angular contact ball bearings in X-life design, universal, with 60° contact angle

Open the catalog to page 1

Longer rating life, higher speeds Universal bearings BSB..-SU-XL for high speed screw drives Features of the new X-life design Through the use of state-of-the-art Technical advantages of the new X-life design manufacturing techniques, axial angular The improved features offer a range of contact ball bearings BSB..-SU-XL in X-life design have the following features: ■ High dynamic load carrying capacity ■ Optimised contact face between the rolling elements and raceway ■ Increased raceway accuracy and Figure 1: Screw drive bearing arrangement with one bearing set, comprising three sealed and...

Open the catalog to page 2

High basic load ratings C, Long grease operating life longer rating life Lhr Thanks to the technical changes, the surfaces, the material used for The reduced bearing friction in the basic dynamic load ratings C are the bearing rings is also subjected to axial angular contact ball bearings around 10% higher than those of special heat treatment. BSB..-SU-XL of X-life design and the previous bearing designs, Figure 3. As a result, the raceways of the inner and the associated reduction in heat gener- outer rings are more resistant to solid ation in the bearing permit high speeds. This also has...

Open the catalog to page 3

Modular concept offers standard designs The customer can select three different designs from one modular concept: Open bearings, not greased, suitable for oil lubrication or grease filling by the user Bearings with minimal gap seal on both sides, greased for life Open bearings, greased with multipurpose grease Arcanol Multitop (available by agreement). Sealed bearings BSB..-2Z-SU-XL Schaeffler offers all sizes in an X-life design with integral minimal gap seal (suffix 2Z). Advantages in detail: They are supplied greased with the multi-purpose grease Arcanol Multitop for optimum running...

Open the catalog to page 4

Bearing designations The designations of the universal bearings BSB..-SU-XL are constructed as follows, Figure 5. Marking of bearings The measured actual deviations of the inside and outside diameter are indicated not only on the box but also on the bearing itself, Figure 6. This means that grouping of bearings can be carried out, if necessary, even when the packaging is not present. Single row axial angular contact ball bearing with 60° contact angle, for screw drives Bore diameter_ Outside diameter_ BSB3062 -SU-XL BSB3062 -SU-XL-L055 BSB3062-2Z-SU-XL Greasing Greased with high performance...

Open the catalog to page 5

Axial angular contact ball bearings Universal bearings for screw drives All sizes are available with greasing by agreement. Ordering example: BSB2562-SU-XL-L055. 2) Based on a preloaded bearing set comprising two greased bearings. 3) Guide value proven in practice for maximum speeds in applications for machine tools (approx. +50 °C bearing temperature for a proportion of 25% of the operating duration and at room temperature. The bearing is preloaded and free from external load).

Open the catalog to page 6

Schaeffler Technologies AG & Co. KG Georg-Schafer-StraBe 30 97421 Schweinfurt Germany Internet www.schaeffler.de/en E-mail info.de@schaeffler.com In Germany: Phone 0180 5003872 From other countries: Phone +49 9721 91-0 Every care has been taken to ensure the correctness of the information contained in this publication but no liability can be accepted for any errors or omissions. We reserve the right to make technical changes. © Schaeffler Technologies AG & Co. KG Issued: 2020, August This publication or parts thereof may not be reproduced without our permission. SSD 42 GB-D

Open the catalog to page 8