Bearings for Screw Drives Longer life, higher speeds

Longer life, higher speeds Bearings for screw drives in X-life quality Series ZKLF is available with fixing holes resistance is lower, less strain is placed in the outer ring to facilitate screw mounting on the adjacent construction. operating life and, where applicable, This solution is particularly economical necessary relubrication intervals are since there is no need for the locating extended. As a result of the lower bore otherwise required for the bearing frictional power, there is a simultaneous outer ring or for the bearing cover with increase in the energy efficiency of the associated...

the previous bearing designs, Figure 3. extends the grease operating life, as less This also has the effect of increasing now choose between a longer rating life strain is placed on the lubricant. In the basic rating life L10 by up to 33%. short, this heat treatment measure leads to a significant increase in bearing rating As a result, the operating life of the bearings is extended under identical Optimised heat treatment life in the X-life design compared to operating conditions. standard and competitor bearings. Alternatively, if the rating life values are the surfaces, the material used for...

MATNR 083666397-0000 / SSD 32 / GB-D / 2013091 / Printed in Germany by bresler Your contact Gerald Nonnast Telephone +49 9132 82-4298 [email protected] Schaeffler Technologies AG & Co. KG Industriestraße 1–3 91074 Herzogenaurach (Germany) www.schaeffler.com